|
|
Post by stusco on Jun 9, 2014 14:47:51 GMT 1
What's the going rate for a 350lc engine as I'm going to try and sell mine but don't know what it's worth?
|
|
|
|
Post by ducatidave on Jun 9, 2014 17:55:25 GMT 1
Probly better with abit more discription
Wot bore size
Running ?
Ext
My guess is around 5/600 if it's a fair engine
Heads alone fetch a lot
|
|
|
|
Post by stusco on Jun 9, 2014 18:11:08 GMT 1
Not seen it run 1.5mm oversize head unmarked. Pistons and bores very good can't say anymore as ii haven't stripped it casings are in good nick no crash damage it's had a repair after a chain snap one of the stator casing holes
Ed doesn't line up
|
|
|
|
Post by steeley on Jun 9, 2014 18:31:18 GMT 1
oh dear ,1.5mm over size. chain snap not the end of the world .oh why aint it been run.crashed bike ,nicked bike,some bike left in a shed for 20 yrs.hmmm.
|
|
|
|
Post by steeley on Jun 9, 2014 19:05:53 GMT 1
no sorry bit harsh there.not long ago rebuilt my engine that was 1.25 over and tuned up a bit.got the barrels resleeved to std size and tune.sorry rant over.wont even think of barrels that sort of o/s now.
|
|
|
|
Post by stusco on Jun 9, 2014 19:09:26 GMT 1
I bought a part restored bike engine was in the freshly powder coated frame wheels fitted the rest was in boxes but I've got a pv motor so dont need the lc got the v5 numbers are all correct, I don't know how long it has sat the guy I bought it of had it for 4 years and was restoring it the engine has had a coat of paint other than that he never said
|
|
|
|
Post by steeley on Jun 10, 2014 6:58:38 GMT 1
as ducatidave said they fetch good money.some one always looking for an engine.ypvs engine is a good mod for the lc you can do more to them performance wise.
|
|
|
|
Post by ducatidave on Jun 10, 2014 9:24:26 GMT 1
Offer it on hear forsale section help your fella rd crazy nuts
You would have 2 say price tho but I think u will not sit on it long for 500
Good luck
|
|
|
|
Post by stusco on Jun 10, 2014 13:59:09 GMT 1
Thanks I've never sold anything on eBay so I was going to put ot on here,but didn't know what it was worth ,when I sell it I can buy more goodies without her moaning!
|
|
|
|
Post by juggler on Jun 10, 2014 14:12:20 GMT 1
you could try looking in "sold" items on ebay for an idea of value - there are a few sold recently in the £350 - £450 region - varying on condition etc
|
|
|
|
Post by stusco on Jun 10, 2014 14:47:45 GMT 1
Just checked through the boxes I got and found lots of gear box bits so I phoned previous owner, get never ran it but replaced the gearbox ,rings and all the seals
|
|
|
|
Post by steeley on Jun 10, 2014 17:40:50 GMT 1
nice ,sounds like its been looked at get it up in the for sales bit on here help a fellow lc owner out.
|
|
|
|
Post by bromy44 on Jun 10, 2014 20:52:45 GMT 1
someone will buy
|
|
|
|
Post by bare on Jun 12, 2014 3:42:19 GMT 1
Yikes! I have boxes of 350 LC engines/bits.
In my part of the world they are close to scrap metal value.
NObody wants them.. in a nutshell.
Including me
|
|
|
|
Post by spooch63 on Jun 12, 2014 21:34:48 GMT 1
Yikes! I have boxes of 350 LC engines/bits. In my part of the world they are close to scrap metal value. NObody wants them.. in a nutshell. Including me Well if you have a 350 top end i'd be only too happy to give you scrap value for it !!! |
|
|
|
Post by spooch63 on Jun 12, 2014 21:40:52 GMT 1
What's the going rate for a 350lc engine as I'm going to try and sell mine but don't know what it's worth? Where about's in the world are you, if your close enough for a ride out would be interested in looking it over with a view to making an offer |
|
guyw
L plate rider.
Posts: 16 
|
Post by guyw on Jun 12, 2014 21:46:03 GMT 1
hi bare on the off chance you are down under I would be interested in your "scrap" too.
|
|
|
|
Post by stusco on Jun 13, 2014 13:20:01 GMT 1
I'm in Edinburgh South Queensferry to be exact
|
|
|
|
Post by spooch63 on Jun 13, 2014 21:12:20 GMT 1
that'll be an 8 hour drive then, never mind, was only in Edinburgh last week
|
|
