YPVS 350 Project

[gazmo]

;D Hi from a newbe Norbo seems a very powerful Master. Ive just found your forum on the web. Just started a project build its not going to be a restoration job but just something I can enjoy, Iam on the lookout for some parts, fuel tank and engine. What are the best standard exhausts to use with a standard engine?I dont want to go down the tuned engine route at the mo. Its been a few years since I ve had a 2smoke , but after years of 4 strokes Ive taken up the faith again. So looking forward to getting the wheels turning again. ;D

[Norbo]

Welcome mate.

I wouldent say i was a powerful Master but that did make me largh.

Anything you need just let me know and if you are haveing trouble with anything feel free to post here or drop me a line anytime i will help as much as i can as will any one elce on here if you post . we are all LC nuts on here and help each other. ;D

[Norbo]

Hi sprog .

welcome to the family ;D

Glad to se your a ypvs rider you do no they rool dont you .

[vinze187]

admin said:

I wouldent say i was a powerful Master

Dude to me and nutters your like yoda!!

bike ride fast on stroke 2 you see!

[gazmo]

;D Hello everybody peeps , been a few weeks since i posted last but have been busy sniffing out more parts for the project,have got most major pieces for the puzzle ( god i love jigsaws what made me do it??) Good and bad with the engine, barrels have been rebored but never used or put together pistons are 2.50 O/S so max rebore, but needs a crank so got to hit the old plastic hard after Chrimbo i suppose.Some porting has been done HE! HE! but Ive got a question for you the reed blocks have been fitted with one piece fiber reeds and the centre of the block has been partialy cut away, should i remove the rest of it top and bottom for fear of it breaking off. I know when I have fitted Boysen reeds to an aircooled rd 250 in the past you only ground the blocks back towards the screws slightly and opened up the stops to around the 10mm mark. Waiting in anticipation (or however you spell it kids are moaning now ive got two stroke oil all over the keyboardddddd)

[Norbo]

I would take out the middle bar alltogether and open up the stops as you say and leev it at that .