|
|
Post by Eyrey1 on Nov 17, 2013 16:19:15 GMT 1
Andy, Whats your tip for fitting the emulators WRT drilling out damper rods, oil qty etc ? (I was actually joking about the Yorkshire thing - I'm from Notts!!) so you didnt quite make it into gods county then jools ? |
|
|
|
Post by tigermac on Nov 19, 2013 9:38:33 GMT 1
Another option is: www.maxtonsuspension.co.uk/ (More expensive than Hagon & Nitron, but great service for us in Oz and a quality piece of kit). |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 19, 2013 9:56:09 GMT 1
Andy, Whats your tip for fitting the emulators WRT drilling out damper rods, oil qty etc ? (I was actually joking about the Yorkshire thing - I'm from Notts!!) so you didnt quite make it into gods county then jools ? What do you mean? He's in Australia now... He made it to gods country in the end!  |
|
jools
Drag-strip hero
Posts: 299
|
Post by jools on Nov 20, 2013 7:06:25 GMT 1
Come on girls you sound like a pair of Aussies  ? Batley tonight for curry and cultural enlightenment ? |
|
|
|
Post by Eyrey1 on Nov 20, 2013 16:35:37 GMT 1
your about 4 miles from me then today jools !
enjoy your curry
i go every now and again to batley for one , not going for a look at the top shelf in padgetts ?
or the nsr500v just don the road ?
everyone says bradford but i like one in batly
|
|
|
|
Post by Norbo on Nov 20, 2013 17:15:44 GMT 1
Well I will have some YSS Lc shocks in about 2 weeks and some YPVS YSS by the end of next month to add to the Haygon and Nitron I already do
|
|
|
|
Post by JonW on Nov 20, 2013 23:27:22 GMT 1
Glad people found the R6 link useful, I wrote that a while back. Most people agree that you dont need to brace, but no harm in doing it of course.
Good news on the YSS shocks norbo, I have them in my XT500.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 21, 2013 1:28:50 GMT 1
Glad people found the R6 link useful, I wrote that a while back. Most people agree that you dont need to brace, but no harm in doing it of course. Good news on the YSS shocks norbo, I have them in my XT500. You happy with the YSS shocks, Jon? Would save me a few bob in shipping as the Shock Shop has them. |
|
|
|
Post by JonW on Nov 21, 2013 2:12:25 GMT 1
Ive not ridden my XT in anger anywhere yet as Im still waiting on the tank to be done, but they were nice quality and well built. As usual if you can find them in Germany you will get a good deal as you save the local taxes and their postage is good value, and I expect cheaper than sourcing in Aus...
|
|
|
|
Post by bare on Nov 21, 2013 4:34:58 GMT 1
For the YSS valves?? Follow the instruction sheet.
As for Fork oil.. I use Mobil 1 ATF.. yess!
Only Belray HVC seems as it's equal.
But then yer welcome to try dozens of fork oil varieties on yer own.
|
|
jools
Drag-strip hero
Posts: 299
|
Post by jools on Nov 23, 2013 7:39:17 GMT 1
your about 4 miles from me then today jools ! enjoy your curry i go every now and again to batley for one , not going for a look at the top shelf in padgetts ? or the nsr500v just don the road ? everyone says bradford but i like one in batly Thanks for arranging the sleet & snow welcome! I know Clive a bit and have been there a few times. My mate Dippo does work for him and Dave Castle is one of the race mechanics all curry house encumbents. |
|
|
|
Post by carioca656 on Nov 24, 2013 22:18:26 GMT 1
if you know dippo & big raz you cant be up to any good them is bad dudes
|
|
jools
Drag-strip hero
Posts: 299
|
Post by jools on Nov 26, 2013 10:49:40 GMT 1
All growing old disgracefully as required !!!
|
|
|
|
Post by botty on Nov 29, 2013 0:53:51 GMT 1
Started this mod on my N2. Bought an R6 shock on ebay £16 looks a good buy. I was going to try and simplify Dusty's link. Until I found the Phosphur bushings required for the bottom shock mount at "Simply bearings". Drilled the top mount to take the bolt. Just need to notch the frame. I think I will reinforce it for peace of mind. |
|
?
