|
|
Post by mudplug69 on Oct 3, 2013 14:43:46 GMT 1
I have a set of un stamped casings for a 250/350 Lc my question is will yamaha stamp them for me?there obviously not a stolen part as there are still ribs on them not ground down etc ! What would others do with them I wonder?
|
|
|
|
Post by mudplug69 on Oct 3, 2013 15:05:30 GMT 1
Thanks for the reply ! Have you ever enquired to see if its possible? Surely they were a dealer part at one point especially with the 4l1 4lo appetite for taking chunks out of them when the chains snapped? These have an astrix and yt scraped on with a screw driver probably for the mot/ log book!
|
|
|
|
Post by oldelsieboy on Oct 3, 2013 15:12:22 GMT 1
I have a set of un stamped casings for a 250/350 Lc my question is will yamaha stamp them for me?there obviously not a stolen part as there are still ribs on them not ground down etc ! What would others do with them I wonder? Why do you want them stamped, don't think it required for registration. OEB |
|
|
|
Post by mudplug69 on Oct 3, 2013 15:26:40 GMT 1
Why wouldn't you? There actually sat in a cupboard just wondered if it was a possibility and if it had been done! It's a yamaha part there not stolen so if you have a bike with non matching numbers you could make it so legally!
|
|
|
|
Post by Denzil on Oct 3, 2013 21:01:01 GMT 1
Interesting thread, I too have a pair of cases with 29L only stamped on them. Why is this??? Easy to stamp up with some low stress stamps.
|
|
|
|
Post by oldelsieboy on Oct 3, 2013 21:10:27 GMT 1
Interesting thread, I too have a pair of cases with 29L only stamped on them. Why is this??? Easy to stamp up with some low stress stamps. Jap home market bikes only had the model code stamped on motors. OEB |
|
|
|
Post by Denzil on Oct 3, 2013 21:19:58 GMT 1
Cheers olds, so basically I got a set of Japanese cases then.
|
|
|
|
Post by oldelsieboy on Oct 3, 2013 21:22:45 GMT 1
Why stamp virgin cases ? that will f##k them up and make them look dodgy  Because you will end up with a matching numbers bike worth much more moola  OEB |
|
|
|
Post by oldelsieboy on Oct 3, 2013 21:23:25 GMT 1
Cheers olds, so basically I got a set of Japanese cases then. Haven't we all  OEB |
|
|
|
Post by Denzil on Oct 3, 2013 21:28:22 GMT 1
Ha ha yes suppose so.
Cheers fella
|
|
|
|
Post by winnerevo1 on Oct 3, 2013 21:41:02 GMT 1
Why stamp virgin cases ? that will f##k them up and make them look dodgy You would only f@ck them up & make them look dodgy if you didn't know what you were doing. Original cases were hand stamped with a particular font stamp. If you had the correct font stamps and stamped them yourself they would look the same... or did the Japs employ stamp specialists???  |
|
|
|
Post by marsbar350 on Oct 3, 2013 22:04:24 GMT 1
Still say leave them alone Matching numbers brigade are the same as the green bolt brigade  headcoats i take it you have a 250 frame with a 250 engine non matching |
|
|
|
Post by Ragger rd on Oct 3, 2013 22:05:16 GMT 1
I have new cases with no numbers and that's the way there staying,priceless to some one with a mint bike and there chain snaps lol
|
|
|
|
Post by winnerevo1 on Oct 3, 2013 22:25:55 GMT 1
Still say leave them alone Matching numbers brigade are the same as the green bolt brigade I have some replacement unstamped cases too and I wouldn't bother stamping either, just that I know if I wanted to stamp them then I could do the same job as the japs did 30 years ago. |
|
|
|
Post by mudplug69 on Oct 3, 2013 22:37:15 GMT 1
ive already got a 1980 matching numbered 4lo and the reason i asked was im having a clear out and should i keep them or chuck them in with a rolling chassis i have or leave it in the cupboard good point mr fourlo think you've answered my question!marsbar 350 can sort you a 250 frame with matching numbers usual chain damage im afraid but do have a nice set of 4l1 cases to do as you want?
|
|
|
|
Post by Ragger rd on Oct 3, 2013 22:44:50 GMT 1
I'm not just a pretty face
|
|
|
|
Post by mudplug69 on Oct 3, 2013 23:35:28 GMT 1
sorry marsbar i read your message wrong the 250s matching numbers its the 350 rolling chassis that isnt!or is it?Done my matching numbered 4lo about 5 years ago cost me a bloody fortune and prices were at a premium! Theres still the odd part im not happy with but along the way ive picked up a few parts! started another project which i didnt really throw my heart into, so for the last couple of years ive just looked at!Bearing in mind ive extended the house in my spare time! Think my friends get more buzz out of my lc they just sit behind snorting two stroke fumes! thats going nowhere, but have a ton of parts or a good project if anyones intrested before it goes on the bay and the missis whants the extension finishing lol
|
|
