|
Post by jimz1000 on Aug 21, 2013 20:24:10 GMT 1
hi all stumbled across your forum on the interwebs and thought i would put a quick post in here. I'm after a set of 4L1-01 carbs for a rebuild. couldn't see a classified section and scouring ebay and find-a-part is yielding nothing. be much appreciated if any of you can help
Cheers
Jim
|
|
|
Post by winnerevo1 on Aug 21, 2013 20:41:20 GMT 1
Welcome,
You need to make 25 posts to see the classified section...
|
|
|
Post by jimz1000 on Aug 21, 2013 20:49:32 GMT 1
well I'm not going to spam your board just the see the classified section so if anyone has some for sale there would they mind pm'ing me.
thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 21, 2013 20:49:34 GMT 1
Jimz it's easy to get to 25 posts. Comment on someone's pictures or rebuild. Tell a joke or two and you will be there in no time
|
|
|
Post by jimz1000 on Aug 21, 2013 20:55:42 GMT 1
to be honest they are for a rebuild that I'm planning on selling so i know i won't get fully involved in your community. i didn't want to dive in here being all friendly rob you all of your resources and then leave. just after a set of carbs for a bike i want to sell. gone through all the usual channels and thought it might be worth a post on a enthusiast forum. I'm not here to troll or offend anyone if that does get taken out of context
|
|
|
Post by muttsnuts on Aug 21, 2013 21:07:00 GMT 1
so your after a set of 250 carbs, I'll have a look for you, think all of mine are 350 (4L0) but I'll check for you and let you know tomorrow
|
|
|
Post by winnerevo1 on Aug 21, 2013 21:10:15 GMT 1
well I'm not going to spam your board just the see the classified section so if anyone has some for sale there would they mind pm'ing me. thanks Good on you for being honest, it's a crap rule anyway and adds no value to the forum.
|
|
|
Post by muttsnuts on Aug 21, 2013 21:13:22 GMT 1
yes,. honesty is the best policy, hence why I responded, at least we know where we stand so happy to help if I can - but if he stayed around for a while he might actually start to like us and maybe that's what he is afraid of, getting the 2 stroke bug and all that !!
|
|
|
Post by oldelsieboy on Aug 21, 2013 21:24:52 GMT 1
well I'm not going to spam your board just the see the classified section so if anyone has some for sale there would they mind pm'ing me. thanks Good on you for being honest, it's a crap rule anyway and adds no value to the forum. But if the forum rules are to be adhered to this post should be removed. Otherwise there is no point in having the rule. OEB
|
|
|
Post by oldelsieboy on Aug 21, 2013 21:26:32 GMT 1
I'm after a set of 4L1-01 carbs for a rebuild. Cheers Jim 250 carbs only come in the 4L1-00 variety. OEB
|
|
|
Post by muttsnuts on Aug 21, 2013 21:43:34 GMT 1
I'm after a set of 4L1-01 carbs for a rebuild. Cheers Jim 250 carbs only come in the 4L1-00 variety. OEB yes appreciate it that, but its surprising how many people get their 250's and 350's mixed up when referring to 4L0 and 4L1, hence why I specifically asked the question
|
|
|
Post by jimz1000 on Aug 22, 2013 7:33:01 GMT 1
was for the 250 4L1 i wasn't sure if the 250 had the same mods as the 350 after the 80' model.
i also apologize if this post is in breach of the forum rule, as muttsnuts said i may grow to like it but i just didn't want to just come in and take the resources then leave. the way I've done it here shows what a good community you have.
Jim
|
|
|
Post by jollyjoiner on Aug 22, 2013 7:42:56 GMT 1
Ban him ban him, whip him, tie him to a tree lol Or you could just hang around and get to like us like Muttsnuts says
|
|
|
Post by 4l04ever on Aug 22, 2013 14:03:08 GMT 1
21 posts until you are legal! :-)
|
|
|
Post by arrow on Aug 22, 2013 14:35:55 GMT 1
Welcome jimz, you seem like a decent guy to me.
|
|
|
Post by jimz1000 on Aug 22, 2013 19:58:20 GMT 1
ok then I'll throw it out, how many of you guys are down on the south coast? Pompey way?
|
|
|
Post by muttsnuts on Aug 22, 2013 21:58:11 GMT 1
a lot more than you think !!
on the carb front, had a good look around today, I must have sold them, or loaned them to some one (most likely the latter) as I can't find them, which is odd as I know I had a set, so suspect I've done someone a favour as I do and then forgotten about it and they have conveniently forgotten to return them to me !
|
|
|
Post by rocketron on Aug 22, 2013 22:26:06 GMT 1
Just looking at comments and did wonder the same as jimz about sales and wants adverts so now i know what is required so i'll have to get to 25 comments quickly. One more thing i've got a 350lc bob farnham tuned to 375 but need some new reeds for it. Has got the flimsey ones. Which set would you recomend a standard metal set or a set of racing reeds?
|
|
|
Post by steve h on Aug 22, 2013 22:46:45 GMT 1
Just looking at comments and did wonder the same as jimz about sales and wants adverts so now i know what is required so i'll have to get to 25 comments quickly. One more thing i've got a 350lc bob farnham tuned to 375 but need some new reeds for it. Has got the flimsey ones. Which set would you recomend a standard metal set or a set of racing reeds? Speak to Lord Norbo. He has some (Banshee?) reed petals, they may fit the bill.
|
|
|
Post by steve h on Aug 22, 2013 22:48:48 GMT 1
was for the 250 4L1 i wasn't sure if the 250 had the same mods as the 350 after the 80' model. i also apologize if this post is in breach of the forum rule, as muttsnuts said i may grow to like it but i just didn't want to just come in and take the resources then leave. the way I've done it here shows what a good community you have. Jim Welcome jim
|
|
|
Post by rocketron on Aug 22, 2013 22:54:13 GMT 1
Just looking at comments and did wonder the same as jimz about sales and wants adverts so now i know what is required so i'll have to get to 25 comments quickly. One more thing i've got a 350lc bob farnham tuned to 375 but need some new reeds for it. Has got the flimsey ones. Which set would you recomend a standard metal set or a set of racing reeds? Speak to Lord Norbo. He has some (Banshee?) reed petals, they may fit the bill. Thanks for that steve
|
|