|
Microns
Aug 11, 2013 11:49:08 GMT 1
Post by Ragger rd on Aug 11, 2013 11:49:08 GMT 1
I have just bought a pair of 1080 micron race pipes,wat sort of jetting might they need ,and wat are they like as I've never had a pair before only. Had all speeds and swear bricks thx
|
|
|
Microns
Aug 11, 2013 11:58:56 GMT 1
Post by oldelsieboy on Aug 11, 2013 11:58:56 GMT 1
Had all speeds and swear bricks thx LOL
|
|
|
Microns
Aug 11, 2013 12:01:54 GMT 1
Post by Ragger rd on Aug 11, 2013 12:01:54 GMT 1
You like that lol thought someone might comment
|
|
|
Microns
Aug 11, 2013 17:05:10 GMT 1
Post by bare on Aug 11, 2013 17:05:10 GMT 1
NO jetting changes need ..in real life.. for those. Fit them and run it :-)
|
|
|
Microns
Aug 11, 2013 17:42:57 GMT 1
Post by Ragger rd on Aug 11, 2013 17:42:57 GMT 1
Ok mate cheers
|
|
|
Microns
Aug 11, 2013 19:38:01 GMT 1
Post by 4l04ever on Aug 11, 2013 19:38:01 GMT 1
NO jetting changes need ..in real life.. for those. Fit them and run it :-) That is assuming your jetting was correct previously....
|
|
|
Microns
Aug 11, 2013 21:24:28 GMT 1
Post by Ragger rd on Aug 11, 2013 21:24:28 GMT 1
Running standard bike when it's finished will check jets
|
|
|
Microns
Aug 11, 2013 21:51:43 GMT 1
Post by lovelydog on Aug 11, 2013 21:51:43 GMT 1
I have old school small can Microns and had to up-jet to 190 AND disconnect the air box,runs sweet as a nut. (apart from being in million pieces right now paint up)
|
|
brads
Weekend rider
Posts: 53
|
Microns
Aug 13, 2013 16:46:04 GMT 1
Post by brads on Aug 13, 2013 16:46:04 GMT 1
I had small can microns on my 350LC. I ran standard jetting and changed nothing except maybe one clip up(leaner) on the needle. Ran like that for 10 years here in Cape Town!!
|
|