|
|
Post by yupster on Jun 24, 2013 19:47:16 GMT 1
Does anybody know the primary coil resistance of the Banshee racing coils that Norbo sells  |
|
|
|
Post by midlifecrisisrd on Jun 24, 2013 21:10:44 GMT 1
0.28 - 0.38 ohms I am led to beleive making 0.14 - 0.19 ohms when connected in parallel which is around half an lc coil
Steve
|
|
|
|
Post by steve h on Jun 24, 2013 22:30:48 GMT 1
.28 - .38ohms is the pri resistance of the original banshee coil as supplied by Mr Yamaha.
I don't think anyone has measured the individual pri resistance of the replacement coils.
But they are working and I don't think there have been any probs with this set up.
It would be nice to know their individual pri & sec resistance though. (for future reference
ie testing)
|
|
|
|
Post by yupster on Jun 25, 2013 0:32:34 GMT 1
Thanks Guys  I was thinking if the primary resistance was too low the increased load would put unnecessary strain on a 30 year old CDI unit but as you say there haven't been any problems. I'm sure my 30 year old coil is tired by now so needs changing.  |
|
|
|
Post by bare on Jun 25, 2013 3:28:54 GMT 1
Coil is either shorted or Not shorted. Charge Capacitor within the CDI Can deteriorate with age though
|
|
