|
|
Post by marsbar350 on Jun 22, 2013 11:02:02 GMT 1
hi guys have just found 4 shouldered bolts M8 20mm long.they have the number 7 stamped on them. any ideas what they are off  |
|
|
|
Post by steve h on Jun 22, 2013 12:21:24 GMT 1
A bike?
|
|
|
|
Post by steve h on Jun 22, 2013 12:36:18 GMT 1
It might be from the right hand, front engine mounting as there is a bolt of that size there. On mine its a non shouldered bolt with "6" stamped on it. What are the numbers on them for anyway? Tensile strength?
|
|
|
|
Post by arrow on Jun 22, 2013 13:34:29 GMT 1
Tensile strength, yes.
|
|
|
|
Post by winnerevo1 on Jun 22, 2013 13:43:10 GMT 1
The only 8 x 20 bolts listed are for the engine mounts but these are not shoulder bolts. The only shoulder bolt listed is for the rear light but they are M6 and only 2 off.
|
|
|
|
Post by Tone on Jun 22, 2013 14:02:32 GMT 1
Is it possible to put a photo up?
|
|
|
|
Post by marsbar350 on Jun 22, 2013 14:23:06 GMT 1
funny..no a steam engine  |
|
|
|
Post by marsbar350 on Jun 22, 2013 14:24:15 GMT 1
nipping in the garage now to take a pic.
i know there not off an LC
|
|
|
|
Post by garyt on Jun 22, 2013 14:24:17 GMT 1
|
|
|
|
Post by marsbar350 on Jun 22, 2013 14:41:45 GMT 1
3 with a 7 1 with a 6 people always after gen bolts and with getting an id on them.passing on to the right bike could help somebody out   |
|
|
|
Post by arrow on Jun 22, 2013 14:46:16 GMT 1
They're not shouldered bolts. Them's flanged bolts.
|
|
|
|
Post by marsbar350 on Jun 22, 2013 14:48:36 GMT 1
They're not shouldered bolts. Them's flanged bolts. i stand corrected  what are they off gary  |
|
|
|
Post by arrow on Jun 22, 2013 14:57:16 GMT 1
I don't know, sorry mate.
|
|
|
|
Post by Tone on Jun 22, 2013 15:14:39 GMT 1
They list some on the parts list for the F2 and N2 models which are flange bolts part number # 95021-08016 for the engine mounting bracket bolts but these are M8 x 16 usually measured under the head of the bolt i.e the threaded part Not the overall length.
Tone
|
|
|
|
Post by steve h on Jun 22, 2013 15:18:45 GMT 1
The only 8 x 20 bolts listed are for the engine mounts but these are not shoulder bolts. The only shoulder bolt listed is for the rear light but they are M6 and only 2 off. Thank God for that! I don't want a firkin Hybrid!  |
|
|
|
Post by steve h on Jun 22, 2013 15:24:10 GMT 1
funny..no a steam engine Steam engine.........BSW : |
|
|
|
Post by marsbar350 on Jun 26, 2013 15:24:29 GMT 1
|
|
|
|
Post by billbott on Jun 26, 2013 15:28:40 GMT 1
Maybe off Barry Sheene's old race bike - get 'em on ebay quick...
|
|
|
|
Post by Norbo on Jun 27, 2013 6:23:51 GMT 1
They could be used for the side lift handle or the engine mounting plates but I don't think they are a standard fitment on an lc but they do look like yam bolts just not lc .
|
|
