N2 headlamp bracket and meter panel/cover

[petearis]

I've not owned a 350 Yamaha since a had LC in early 80s - so I'm new to the YPVS range, having recently picked up an F2. I prefer the look of the unfaired models. I'm guessing that an 'N' model headlight bracket and meter panel/cover are difficult to get. I don't suppose anyone has any parts they're will to sell?

Pete

[midlifecrisisrd]

Headlight bracket is a bit rare ( read expensive ) and go on ebay for up to £100.

Once you get to 25 posts you can see the classified section so would be able to post a wanted ad.

As for the clock cover they are a pair of cases which again ebay probably the best bet ( or wanted ad in classified section ).

YPVS N cases or FZR 250 or TZR 250.

www.ebay.co.uk/itm/Yamaha-TZR250-TZR-250-1KT-2MA-1987-1991-Clocks-Speedo-Clox-Instruments-/350721315198?pt=UK_Motorcycle_Parts_13&hash=item51a89e917e



F2 instruments and loom go straight in. Cases alone are usually about £40 but best if you can get a uk full set ( assuming you are in UK ) as you can punt your F2 clocks to get some money back

Steve

[petearis]

Thanks Steve

So the F2 speedo, tacho and temp gauge would go straight into the TZR/FZR clock cases and the cases would connect to the F2 top yoke OK? Although I suppose it would better to try to get some YPVS N cases first. I'm in no rush, I've got other things to ride

Pete

[midlifecrisisrd]

Jun 5, 2013 23:00:02 GMT 1 petearis said:

Thanks Steve

So the F2 speedo, tacho and temp gauge would go straight into the TZR/FZR clock cases and the cases would connect to the F2 top yoke OK? Although I suppose it would better to try to get some YPVS N cases first. I'm in no rush, I've got other things to ride

Pete

Yes the gauges will go straight in the N cases. Only early FZR 250 cases are the same. The 600/1000 ones look the same from the top but the rear case is different.

The cases bolt to the headlight bracket, not the yoke.

Steve