Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2013 10:50:27 GMT 1
should really change the exhaust gaskets as they are blowing a bit  maybe in next couple of days |
|
|
|
Post by Trubrit on May 17, 2013 11:11:19 GMT 1
Get At Least One Legal & On The Road.....  |
|
phil38
Thrash Merchant
Posts: 426
|
Post by phil38 on May 17, 2013 13:56:22 GMT 1
Put the engine back together & ride it!
|
|
|
|
Post by looey on May 17, 2013 14:02:46 GMT 1
Make it go  ;D |
|
|
|
Post by andygasgas on May 17, 2013 14:43:28 GMT 1
Kick the painter up the ar* e only waiting on paint for last 4 months |
|
|
|
Post by copper99 on May 17, 2013 19:12:34 GMT 1
Now I have it home, I need to visit Norbo's again with a list of parts I need as finishing touches on the fasteners and fittings areas on the bike..
|
|
|
|
Post by raven13 on May 17, 2013 19:24:45 GMT 1
scrap the fecking thing,lol.
|
|
|
|
Post by steve h on May 17, 2013 19:28:12 GMT 1
scrap the fecking thing,lol. ;D ;D ;D |
|
|
|
Post by jollyjoiner on May 17, 2013 20:42:16 GMT 1
Take right hand casing off and re seal gasket
|
|
|
|
Post by steve h on May 17, 2013 20:50:51 GMT 1
Get an idiot to paint it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2013 21:57:06 GMT 1
I'd be here all day..............
|
|
|
|
Post by Bozzy on May 17, 2013 22:16:00 GMT 1
Sort small oil leak to bottom of clear clutch window (if I could get he bugger off) and take bike to dyno centre to get it setup  |
|
|
|
Post by majortom on May 18, 2013 6:53:14 GMT 1
Gonna ride mine as much as possible all week end 😄😃
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2013 9:16:40 GMT 1
scrap the fecking thing,lol. LOL. We all know what you mean bro ........ ;D should really change the exhaust gaskets as they are blowing a bit maybe in next couple of days Replace the offside fork seal. |
|
crip
Weekend rider
Posts: 95
|
Post by crip on May 18, 2013 12:11:42 GMT 1
need to repaint down pipes and sort out gaskets as they are blowing black gunk everywhere..grrr
|
|
scoobysal
Thrash Merchant
If it hurts, you know ya made it.
Posts: 324
|
Post by scoobysal on May 18, 2013 22:25:57 GMT 1
Thrash it.
|
|
|
|
Post by Roofmonster on May 18, 2013 22:41:22 GMT 1
Check my speedo - its miles out (miles out ha ha ) My brother is coming round with his 1200 Bandit tomorrow so we can see how much its out - hope he can keep up!
|
|
|
|
Post by Delbert on May 19, 2013 7:56:32 GMT 1
Think im all good ,,, till I ride it again |
|
|
|
Post by arrow on May 19, 2013 19:19:20 GMT 1
A wash and valet.
|
|
|
|
Post by raven13 on May 19, 2013 21:09:05 GMT 1
what i should really do is send it along with a bucket load of cash to someone who can make the feckin thing run properly
|
|
artie
Thrash Merchant
Posts: 341
|
Post by artie on May 19, 2013 21:23:24 GMT 1
Get me forks rebuilt
|
|
scoobysal
Thrash Merchant
If it hurts, you know ya made it.
Posts: 324
|
Post by scoobysal on May 23, 2013 14:51:32 GMT 1
Get my fork seals sorted.
|
|
guernseyrob
L plate rider.
1986 350 YPVS N1 & 1985 350 31k YPVS
Posts: 39 
|
Post by guernseyrob on May 23, 2013 21:22:45 GMT 1
Get my forks rebuilt too........seems to be a common passtime!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 26, 2013 17:30:27 GMT 1
still need to do my exhaust gaskets,
Norbo is bringing me some tonight when he comes to my house, maybe do them next week ;D
|
|
monkfish
Thrash Merchant
NaNaNaNaNaNaNa Argos
Posts: 350
|
Post by monkfish on May 26, 2013 18:20:04 GMT 1
I did my fork seals and they still leaked a bit so I stuffed some rag inside the dust caps to get it though the mot.......the rag is still there
|
|
|
|
Post by paul1964 on May 29, 2013 19:42:21 GMT 1
sort out a bad earth wire some where
|
|
|
|
Post by steve h on May 29, 2013 23:57:39 GMT 1
Pay more attention to it. (old windy girl gets all the attention now)
|
|
|
|
Post by Norbo on May 30, 2013 5:51:30 GMT 1
replace piston on fery bike replace head g asket on 31K steve baker. replcae powervalve sels on LC steve baker and polish the bikes to make them look nice.
|
|
|
|
Post by Roofmonster on May 30, 2013 15:47:54 GMT 1
Change my front mudguard now that winnerevo1 has kindly supplied me with a bracket - many thanks.
|
|
maybe in next couple of days
;D
