|
Post by copper99 on Feb 2, 2018 10:29:36 GMT 1
Picked up my barrels and crankcases from Tony at AJS Aquablasting today, one case was repaired (usual chain damage job) , he's done a top job with all of it, really nice fella to deal with as well. The weld repair looks spot on! Actually it’s almost invisible. I expecting delivery of the olive drab parts from Tony tomorrow.. hoping for similar quality. Kostas Hi Kostas, we spoke about your parts! I was looking at some replated parts he had done on another customers engine and he mentioned he'd had some come in from Greece, I dont think you will be disappointed..
|
|
|
Post by kostas on Feb 3, 2018 16:26:59 GMT 1
The weld repair looks spot on! Actually it’s almost invisible. I expecting delivery of the olive drab parts from Tony tomorrow.. hoping for similar quality. Kostas Hi Kostas, we spoke about your parts! I was looking at some replated parts he had done on another customers engine and he mentioned he'd had some come in from Greece, I dont think you will be disappointed.. Got the plated parts from Tony 0CD66E93-6190-4E2D-9836-9C99FB417D93 by k.apostolopoulos, on Flickr
|
|
tezrhc
Drag-strip hero
Posts: 293
|
Post by tezrhc on Feb 3, 2018 19:20:01 GMT 1
Fitted Wiseco pistons, cylinders,clutch casing and kickstart.
|
|
|
Post by reedpete on Feb 3, 2018 19:36:24 GMT 1
Bought my LCs another sibling today, well collected it anyway. When I say sibling ....will be one day. Another 1980 UK 4L0 brought back from the brink.
|
|
fieroman
L plate rider.
Live to ride, ride to live
Posts: 22
|
Post by fieroman on Feb 4, 2018 1:57:22 GMT 1
Nothing, my rd.project is in Orillia,Ontario,Canada getting cold and I am in Miami,Florida staying warm. Cheers to you all. Mark
|
|
|
Post by donkeychomp on Feb 4, 2018 22:19:34 GMT 1
|
|
|
Post by russpuss on Feb 4, 2018 22:46:28 GMT 1
Not an LC but 2t all the same
|
|
|
Post by 1966baz on Feb 5, 2018 19:42:05 GMT 1
Got freezing hands out on the TZR 250. Roll on spring!
|
|
tommo
Drag-strip hero
Posts: 279
|
Post by tommo on Feb 5, 2018 20:01:44 GMT 1
luv them x7s
|
|
|
Post by Tobyjugs on Feb 5, 2018 23:57:11 GMT 1
Today i spent some time cleaning the bike because of all the salt thats on the roads plus it was full of sand from driving it to the beach. White fury patches started to develop. I prefer a dull silver colour so this was clean with a lapping compound and Scotch Brite and then car polish was applied with the hope of giving it a little protection.
|
|
|
Post by hudtm60 on Feb 6, 2018 18:02:42 GMT 1
Paid PJME for rebore, Mitaka's and a brand new crank with TZ big ends...I initially asked for a first oversize and they said "I’m sorry to say they did not clean up at 0.25mm there was wear in the bores but both have cleaned up at 0.50mm." much impressed and dead chuffed I sent them there. Another Dusty Recommendation rings true.
|
|
|
Post by reedpete on Feb 6, 2018 22:18:53 GMT 1
Paid PJME for rebore, Mitaka's and a brand new crank with TZ big ends...I initially asked for a first oversize and they said "I’m sorry to say they did not clean up at 0.25mm there was wear in the bores but both have cleaned up at 0.50mm." much impressed and dead chuffed I sent them there. Another Dusty Recommendation rings true. I presume they were damaged then, not just worn?
|
|
|
Post by hudtm60 on Feb 7, 2018 19:29:14 GMT 1
I didn't think they were damaged at all....but I trust PJME to do the right thing...either way I'm happy to even have just a fraction more of a cc to play with....
|
|
|
Post by simon998 on Feb 8, 2018 10:46:17 GMT 1
|
|
|
Post by hudtm60 on Feb 8, 2018 19:33:56 GMT 1
a few more bits from Norbo in his whateverslyingabout yet effective packaging- what's in here then?
|
|
|
Post by midlifecrisisrd on Feb 8, 2018 19:36:25 GMT 1
a few more bits from Norbo in his whateverslyingabout yet effective packaging- what's in here then? I'll guess handlebars Steve
|
|
|
Post by hudtm60 on Feb 8, 2018 19:38:45 GMT 1
we have a winner. no prizes today however. the difference I've discovered btw Norbo and Yambits is that, unless otherwise specified, most of Norbo's parts are....Gen Yam. that's what I like.
|
|
|
Post by midlifecrisisrd on Feb 8, 2018 19:41:49 GMT 1
I only know as I've had a set of bars with a mirror box over each end so insider information
Steve
|
|
|
Post by somethingelsie on Feb 10, 2018 17:16:20 GMT 1
Picked up yesterday my beautiful Rz350r paintwork from Mark cordwell. Absolutely stunning job. Would post a pic if I could figure it out lol
|
|
|
Post by jackjabba on Feb 10, 2018 17:21:37 GMT 1
Not an LC but 2t all the same Got to admit to liking the X7 in White.
|
|
|
Post by russpuss on Feb 10, 2018 20:44:39 GMT 1
Not an LC but 2t all the same Got to admit to liking the X7 in White. Yes I’ve got a nice mk1 in white.
|
|
|
Post by Gunny on Feb 11, 2018 0:39:25 GMT 1
Yesterday morning Last night Tonight This was just for a photo as some idiot forgot to order gudgeon pin circlips 🤔 Thanks to Norbo for sending my clutch plates and springs straight out after i text him yesterday mornin..The plates are marinading in yamalube just now so i’ll get the clutch done tomorrow. Ran out of things to do on the pv engine so took my dt200 apart to clean the carb
|
|
shelby
L plate rider.
Posts: 33
|
Post by shelby on Feb 11, 2018 3:22:59 GMT 1
got my engine back in after stan stephen rebuild
|
|
|
Post by simon998 on Feb 11, 2018 9:15:12 GMT 1
Shiny. Than built a micron end can from just a shell and some perforated exhaust tube and packing from ebay.
|
|
|
Post by simon998 on Feb 11, 2018 9:15:53 GMT 1
Massive pictures are massive.
|
|
|
Post by Tobyjugs on Feb 11, 2018 16:00:01 GMT 1
Massive pictures are massive. Big pictures are good
|
|
|
Post by marsbar350 on Feb 11, 2018 17:31:26 GMT 1
|
|
|
Post by copper99 on Feb 11, 2018 20:57:26 GMT 1
You'll be able to get your elbow down on those Andy....
|
|
|
Post by Tobyjugs on Feb 11, 2018 20:59:32 GMT 1
You'll be able to get your elbow down on those Andy.... I'm looking forward to seeing some picture's it sound good and a bit different to the norm
|
|
|
Post by marsbar350 on Feb 11, 2018 21:07:01 GMT 1
I've posted pics on the crazy Facebook page
|
|