gpzzzr build

[bigal1]

well over the last few months iv been building this
i started off with these 2

[bigal1]

then you do a bit of this

[bigal1]

[bigal1]

so Saturday I spent in the warm garage away from the cold snow just pop'd out for gas for the welder
1st job was to mount the zzr clocks to the fairing frame

then it was fit the lower fairing this was a pain but I got there in the end a bit of cutting to the bellypan so the down pipes can hang down but i still need to mod to fit the zrx rad when it gets ere

[bigal1]

jobs still to do
fit zrx1200 rad and oil cooler
fit zrx 1200 head
strengthen the frame
then its strip down and off to be powdercoated

[bigal1]

front engine mount made at a cost of £45.. and a Saturday driving about to get the 6mm plate cut and bent then had to do a bit of moding with it when I got it back,, drill the holes and make the brace one side to the other also had to grind the lug were the old 9r engine bolted to the frame to make it flush so the new 6mm bracket sits flush on the frame

[bandit123]

now thats abit different

[bigal1]

rad fitted the weelend what a bitch off a job that was
i have also been on a yank web site to try and find out a bout a head mod i will be doing they have worked out this should be doing close on 160 to 170 bhp shit that gona be a bit mad for a old 9r but fun lol

[phil916]

Interesting!? Looking good tho, I love these threads of work from start to finish!