|
|
Post by tsa on Dec 15, 2012 22:38:28 GMT 1
Im looking into getting Carbon fibre Tanks and bidywork for the 31K as good tanks are rare now and good uncracked panels are like hens teeth. I have a potential supplier of these panels etc in proper carbon fibre all vac bagged and heated. The moulds are very expensive so Im looking to test the waters to see who would be interested in what parts before I get any moulds done. Tanks will run about £750 so he tells me and weigh about 1kg ish. Will be a direct replacement exact copy as will all panels. These arent and wont be cheap shit copies but pucker product from a guy with years of experience in composites.
Please only vote if you would really buy this product as I need to see what the demand would be for these parts.
|
|
|
|
Post by Norbo on Dec 16, 2012 13:03:30 GMT 1
I think the tanks would be good for some people but i all ready do the pannels These are the carbon ones I have totally mint will the nipples and clips just like the standard ones £75  They are polly prop panels the same as my LC ones £45  |
|
|
|
Post by tsa on Dec 16, 2012 15:20:31 GMT 1
Cool Norbo I didnt know you did the panels. Do you only do the side panels?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 16, 2012 17:14:56 GMT 1
Carbon fibre tail piece or normal?
|
|
|
|
Post by Norbo on Dec 17, 2012 8:44:53 GMT 1
I have carbon tail pics for lc side pannels stator cover belly pan and front mudsy on the way . I have lots just cant up load anything to the shop page unntull i get my puta back from Rob Ham who is fixing it . I have loads of real nice trick bits 4mm stroker cranks big bore kits trick ypvs stator covers 2 typrs oil/water covers and about 30 new gen yam parts trick fuel caps engraved trick F2 muddy braces and the list gows on .
|
|
|
|
Post by skydemon on Dec 17, 2012 20:37:16 GMT 1
Leavin it late Norbo. It's Christmaaaaaaas
|
|
|
|
Post by skydemon on Dec 17, 2012 20:37:47 GMT 1
I want a carbon rad plate like yours Norbo
|
|
|
|
Post by sunnamp33 on Dec 18, 2012 2:04:46 GMT 1
|
|
|
|
Post by Norbo on Dec 18, 2012 8:45:31 GMT 1
I all so have some real nice frame infills for the frame for a ypvs they look nice i have some fitted to my valve im taking to the show at newark.
|
|
|
|
Post by midlifecrisisrd on Dec 18, 2012 9:04:25 GMT 1
I all so have some real nice frame infills for the frame for a ypvs they look nice i have some fitted to my valve im taking to the show at newark. Are they carbon  If so I feel a set coming up in the future Wish I hadn't asked the wife for a billet clutch now  Steve |
|
|
|
Post by gadget1 on Jan 29, 2013 21:12:19 GMT 1
Hi
How much are the frame in fills?
Cheers
|
|
|
|
Post by watchhislegs on Jan 29, 2013 22:11:31 GMT 1
when you putting all this stuff on the website norbo? i've got money to burn.
sorry for the thread hijack.
|
|
|
|
Post by Norbo on Jan 29, 2013 23:13:43 GMT 1
LOL i get my puta back this thursday so after i get my friend to pop over and install the web builder and hook me up to the net ill get started on all the new stuff i have .
Honestley you would not beleave the trick and gen yam stuff i have not on the site its a shop all on its own. there must be almost 9K of stuff just laying about not for sale . and thats befor you take in to account the carbon stuff .
|
|
|
|
Post by foxyfeeling on Jan 30, 2013 8:36:33 GMT 1
ROLL ON THURSDAY
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 30, 2013 11:48:57 GMT 1
Headcoats you going to leave the carbon tail piece plain carbon or have it painted like mine, with just speed blocks masked off showing the carbon?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 30, 2013 13:58:38 GMT 1
Have you seen picture of my tail piece? And not only strong but mine only weighs 95 grams
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 30, 2013 14:53:38 GMT 1
No, any female can see it
|
|
|
|
Post by foxyfeeling on Feb 4, 2013 15:36:16 GMT 1
Hi Norbo was just wondering when we could hope to see your new stuff on your shop page?  ?? |
|
??