jackup
Thrash Merchant
Of all the things I've lost I miss my mind the most
Posts: 388
|
Post by jackup on Sept 29, 2012 13:14:05 GMT 1
Ok I have got a micro set of indicators to fit to my project they use a small amber bulb when I wire them in they won't flash ,so I thought might need a inline resistor so got a set of them and they still don't flash ,when I wire in the standard type indicators they flash ok ,any solutions?
|
|
|
Post by crash on Sept 29, 2012 16:02:34 GMT 1
change the bulbs?
|
|
jackup
Thrash Merchant
Of all the things I've lost I miss my mind the most
Posts: 388
|
Post by jackup on Sept 29, 2012 16:39:11 GMT 1
Sorry didn't say bulbs light up but don't flash
|
|
|
Post by Shytalk on Sept 29, 2012 17:45:55 GMT 1
You need a different type of flasher relay designed for the new indicators.
|
|
jackup
Thrash Merchant
Of all the things I've lost I miss my mind the most
Posts: 388
|
Post by jackup on Sept 29, 2012 19:08:58 GMT 1
any idea what type
|
|
|
Post by Trubrit on Sept 29, 2012 19:31:18 GMT 1
. I Used This Type With My Mini LEDs ....If You Need One To Try I Have A Few.....
|
|
jackup
Thrash Merchant
Of all the things I've lost I miss my mind the most
Posts: 388
|
Post by jackup on Sept 29, 2012 20:23:22 GMT 1
Cheers sourced it on eBay hopefuly it will work
|
|