|
|
Post by stampy on Apr 11, 2021 22:10:35 GMT 1
Hi just after a guide to a base settings for my build please
YPVS, 350
Fast road tune
TSA pipes
ignitek
powerdyno
Mikuni VM28 418 Flatsides TM28
Gutted air box
Just need some help to start up and run before I head off to Daves for a proper set up
Please and thank you
|
|
|
|
Post by steeley on Apr 12, 2021 7:51:51 GMT 1
Hi , in your post you have vm28 i assume you are using flat slides yes . Years ago i ran some carbs from a Tzr250 2ma . These were bored out to 30mm on my f2 tune 350lc . I ran std pilot jets but had either 280 or 290 main jets . I messed about with these for years and in the finish i put the std carbs back on and gave the flat slides to a chap who had a Tzr250 .
|
|
|
|
Post by andy748 on Apr 12, 2021 8:41:59 GMT 1
Hi Stampy, i've got a set on my LC hybrid and N1, 300 mains in the N1 with Daves all round pipes and a fast road tune, standard airbox and runs sweet. 290s in the Hybrid with Tyga cross overs with mild tune. Andy.
|
|
|
|
Post by stampy on Apr 12, 2021 8:58:01 GMT 1
Hi Stampy, i've got a set on my LC hybrid and N1, 300 mains in the N1 with Daves all round pipes and a fast road tune, standard airbox and runs sweet. 290s in the Hybrid with Tyga cross overs with mild tune. Andy. Great Andy thanks, I am having problems starting it from a fresh build, Just wondering if you knew what starter jets and pilots you run. Please |
|
