robh
L plate rider.
Posts: 43 
|
Post by robh on Apr 10, 2021 19:39:26 GMT 1
Hi guys. New here but understand I can't see classifieds etc until I have 10 posts. I've been rebuilding a UK 350F 31K RWB (slowly) over the last 7 years or so. It's looking really good but it only recently became obvious (I mean REALLY obvious) that I've got mismatched Clip ons!! I can't believe I missed it, even had them powder coated and still didn't notice! One has the plastic insert/stopper at the clock end (correct for F1, presumably) and the other (right, brake side) is cut at an angle with no stopper (F2 model?). They're not even the same height, god knows how the previous owner rode the bike...
If someone could confirm which is correct for my model it would be a good start. I'm putting it back to original spec so need the correct bars, that's about all I need to complete it.
Thanks
RobH
|
|
|
|
Post by Yogi on Apr 10, 2021 19:43:12 GMT 1
The correct one has the plastic stopper
Welcome aboard
Matt 🐻
|
|
|
|
Post by Yogi on Apr 10, 2021 19:46:36 GMT 1
Here’s my F1  Matt 🐻 |
|
|
|
Post by Yogi on Apr 10, 2021 19:53:33 GMT 1
Just thought I’d add only the F1 has them,The N1 has the other type
same as F2/N2 and R
|
|
|
|
Post by midlifecrisisrd on Apr 10, 2021 19:59:09 GMT 1
Hi guys. New here but understand I can't see classifieds etc until I have 10 posts. I've been rebuilding a UK 350F 31K RWB (slowly) over the last 7 years or so. It's looking really good but it only recently became obvious (I mean REALLY obvious) that I've got mismatched Clip ons!! I can't believe I missed it, even had them powder coated and still didn't notice! One has the plastic insert/stopper at the clock end (correct for F1, presumably) and the other (right, brake side) is cut at an angle with no stopper (F2 model?). They're not even the same height, god knows how the previous owner rode the bike... If someone could confirm which is correct for my model it would be a good start. I'm putting it back to original spec so need the correct bars, that's about all I need to complete it. Thanks RobH I'll pm you a link to one Steve |
|
|
|
Post by JonW on Apr 11, 2021 0:53:36 GMT 1
Why not just make the 10 posts and get to know us and let us get to know you, then access the wanted section?
Anyway, the one you want is as has been said above.
|
|
robh
L plate rider.
Posts: 43
|
Post by robh on Apr 11, 2021 19:25:36 GMT 1
Thanks guys. Clip on now sorted thanks to Steve. I intend to stick around. My interest has been renewed now I'm finally nearing the end of my build. I've got plenty of questions - not a lot of answers though, unfortunately  However, I make a modest living selling sparkplugs and related ignition bits and pieces so may be able to help if anyone needs any part number info, race plugs, tools etc. |
|
|
|
Post by veg on Apr 11, 2021 20:01:45 GMT 1
We’ve all got plenty of questions and thankfully lots of answers on here. We like pics of bikes and we don’t like which is the best “tyre” “oil” 😁
Glad you’re sorted, Steve’s a good bloke 👍
Put up a link to what you do.
|
|
|
|
Post by midlifecrisisrd on Apr 11, 2021 20:48:24 GMT 1
Aw shucks 😊
It was timing really, the day before I noticed a NOS one badly listed on ebay for £50
Steve
|
|
|
|
Post by Robbieben on Apr 15, 2021 11:40:51 GMT 1
Thanks guys. Clip on now sorted thanks to Steve. I intend to stick around. My interest has been renewed now I'm finally nearing the end of my build. I've got plenty of questions - not a lot of answers though, unfortunately However, I make a modest living selling sparkplugs and related ignition bits and pieces so may be able to help if anyone needs any part number info, race plugs, tools etc. I need a set of clip ons for the 31K I'm restoring if you or anyone know of any more available. Thanks |
|
|
|
Post by JonW on Apr 16, 2021 1:07:21 GMT 1
Thanks guys. Clip on now sorted thanks to Steve. I intend to stick around. My interest has been renewed now I'm finally nearing the end of my build. I've got plenty of questions - not a lot of answers though, unfortunately However, I make a modest living selling sparkplugs and related ignition bits and pieces so may be able to help if anyone needs any part number info, race plugs, tools etc. I need a set of clip ons for the 31K I'm restoring if you or anyone know of any more available. Thanks 4 more posts and you can put up a post in the wanted section. |
|
However, I make a modest living selling sparkplugs and related ignition bits and pieces so may be able to help if anyone needs any part number info, race plugs, tools etc.
