|
Post by sulzeruk on Jan 16, 2021 18:10:13 GMT 1
Greeting from a not so sunny Scotland. I have recently bought a 350 LC project that has been sat nearly 30 years. It loooks like it has been proddy raced at somepoint as well for good measure. Was handy money though so no complaints. I also make and sell parts for 60's 2 stroke twins Yams too and have done for over 25 years now! I also have a shed full of ZXR Kwaks as well in race and road trim, makes LC stuff look cheap!
The 350 engine is long gone unfortunatelhy but it came with 2 250 complete engines, there are 2 sets of 4L0 stamped carbs and the 350 wheel is still there too so not all bad. It even came with an log book!
Alasdair Cowan
|
|
|
Post by arrdy350 on Jan 16, 2021 18:16:07 GMT 1
Welcome to the forum. Good luck with the project π
|
|
|
Post by Yogi on Jan 16, 2021 18:33:45 GMT 1
Welcome aboard mate π§Έ
|
|
|
Greetings
Jan 16, 2021 18:44:24 GMT 1
via mobile
Post by midlifecrisisrd on Jan 16, 2021 18:44:24 GMT 1
Welcome in, we need more fellow Jocks π
Steve
|
|
|
Post by stusco on Jan 16, 2021 18:47:43 GMT 1
Welcome Where in Scotland im just outside Edinburgh
|
|
|
Post by sulzeruk on Jan 16, 2021 18:51:21 GMT 1
The centre of the UFO universe, Bonnybridge.
|
|
|
Post by geoffb on Jan 16, 2021 19:16:11 GMT 1
sulzeruk Welcome and I am looking forward to seeing and hearing how your project goes. π
|
|
|
Post by sulzeruk on Jan 16, 2021 19:19:20 GMT 1
i'll start a build thread when it comes apart.
|
|
|
Greetings
Jan 16, 2021 19:23:43 GMT 1
via mobile
Post by 3tj6 on Jan 16, 2021 19:23:43 GMT 1
Are you the man whoβs zxrβs won the classic tt?
|
|
|
Post by sulzeruk on Jan 16, 2021 19:24:23 GMT 1
I am.
|
|
|
Greetings
Jan 16, 2021 19:26:24 GMT 1
via mobile
Post by 3tj6 on Jan 16, 2021 19:26:24 GMT 1
Welcome πseen the zxrβs on pb forum π
|
|
|
Greetings
Jan 16, 2021 19:27:58 GMT 1
via mobile
Post by midlifecrisisrd on Jan 16, 2021 19:27:58 GMT 1
You are a kick in the 4rse from me then
I'm Cumbernauld
Steve
|
|
|
Post by andy748 on Jan 16, 2021 19:30:42 GMT 1
Welcome in to the Madhouse! Andy.
|
|
|
Post by dusty350 on Jan 16, 2021 19:38:13 GMT 1
Welcome to the forum Dusty
|
|
|
Post by 29davyt on Jan 16, 2021 19:38:50 GMT 1
Welcome in m8 ! Are you going for a standard ( ish) build or something more radical ?
|
|
|
Post by Tobyjugs on Jan 16, 2021 19:40:09 GMT 1
Welcome to the forum
|
|
|
Post by sulzeruk on Jan 16, 2021 19:56:43 GMT 1
Don't know what to do with it yet. May change the front and rear end as there are plenty of standard ones out there now. Need to have a read up and see what fits.
|
|
|
Post by Gitram on Jan 16, 2021 21:55:09 GMT 1
so much info and inspiration in the build threads et c. plus everyone is free with their knowledge, this site is possibly the best single make forum in the world... I live in inverness..
marti
|
|
|
Post by sulzeruk on Jan 16, 2021 22:11:25 GMT 1
I am a train driver so up in Inverness quite often. Looking forward to getting on with the project. Hopefully done for the summer when we might actually be able to do something again.
|
|
|
Greetings
Jan 16, 2021 22:24:12 GMT 1
via mobile
Post by headcoats on Jan 16, 2021 22:24:12 GMT 1
What parts do you make as maybe you could turn your hand to LC stuff π€
|
|
|
Greetings
Jan 16, 2021 22:27:31 GMT 1
via mobile
Post by veg on Jan 16, 2021 22:27:31 GMT 1
Another jock itβs getting like the ice cream mafia in here π Welcome in buddy. π
|
|
|
Post by 29davyt on Jan 16, 2021 22:28:52 GMT 1
so much info and inspiration in the build threads et c. plus everyone is free with their knowledge, this site is possibly the best single make forum in the world... I live in inverness.. marti If itβs not the best single make forum in the world itβs certainly the best Boxing ring forum sometimes π
|
|
|
Post by JonW on Jan 16, 2021 22:37:56 GMT 1
Welcome in, we love a good project on here. Put up some pics and start a build thread when you get going.
|
|
|
Post by rigga on Jan 16, 2021 23:52:30 GMT 1
Another jock itβs getting like the ice cream mafia in here π Welcome in buddy. π We need to speak to Norbo and limit the sweatys from joining. No..... that's not gonna work, welcome to the forum fella
|
|
|
Greetings
Jan 17, 2021 0:18:41 GMT 1
via mobile
Post by beardy on Jan 17, 2021 0:18:41 GMT 1
Welcome in mate. Iβm a Kawasaki man but appreciate other bikes hence why Iβm here ππ»
|
|
aj5764
L plate rider.
Posts: 23
|
Post by aj5764 on Jan 17, 2021 8:29:12 GMT 1
Welcome mate . Andy
|
|
cnkxu1
Thrash Merchant
Posts: 390
|
Post by cnkxu1 on Jan 17, 2021 9:39:06 GMT 1
Welcome
|
|
|
Post by lcmarky on Jan 17, 2021 9:42:29 GMT 1
Welcome along Andy.
Howβs the TR coming along?
|
|
|
Greetings
Jan 17, 2021 12:22:14 GMT 1
via mobile
Post by liffy16 on Jan 17, 2021 12:22:14 GMT 1
Welcome this is one of the best forums around as stated, was going to do something different with my 250lc project but ended up going down the standard route and she turned out alright ,trouble is I've still got that hybrid itch to scratch ππ
|
|
|
Post by stusco on Jan 17, 2021 12:45:55 GMT 1
so much info and inspiration in the build threads et c. plus everyone is free with their knowledge, this site is possibly the best single make forum in the world... I live in inverness.. marti The last time i was in Inverness i ended the night rolling about the floor with some bouncers in a pub near the train station π±
|
|