|
|
Post by Yogi on Sept 20, 2020 18:41:13 GMT 1
Been asked by my old mate Petey to finish his Lc  Started by removing the rear swinger ready to make a chain slider  Matt 🧸 |
|
|
|
Post by arrdy350 on Sept 20, 2020 20:06:55 GMT 1
Nice hybrid  Is that a Metmachex swing arm on it? |
|
|
|
Post by Yogi on Sept 20, 2020 20:21:29 GMT 1
Nice hybrid Is that a Metmachex swing arm on it? Sure is mate 👍 |
|
|
|
Post by flames on Sept 21, 2020 10:42:15 GMT 1
Is bike standard apart from running gear?
|
|
|
|
Post by Yogi on Sept 27, 2020 16:10:07 GMT 1
Is bike standard apart from running gear? Not sure mate,I think it’s got. Mick abbey tune,,Petey over to you 😉 |
|
|
|
Post by Yogi on Sept 27, 2020 16:15:56 GMT 1
Got a few hours in the cave today    Made a new chain slider and fitted new did oring chain polished swinger and applied new decals,then fitted a triumph stand Finished off by measuring and ordering a set of bespoke venhill brake lines Matt 🧸 |
|
|
|
Post by flames on Sept 27, 2020 16:23:04 GMT 1
Can see you ain't wasting much time. Another one to keep a watch on.👍
|
|
|
|
Post by arrdy350 on Sept 27, 2020 17:06:17 GMT 1
Very nice. I like the gold chain on the sprocket where did you get the Metmachex swingarm decals from? |
|
|
|
Post by Yogi on Sept 27, 2020 17:12:09 GMT 1
Very nice. I like the gold chain on the sprocket where did you get the Metmachex swingarm decals from? They were £15 from eBay if memory serves 👍 |
|
|
|
Post by 3tj6 on Sept 27, 2020 19:48:09 GMT 1
What’s the bench the bike is on ?
|
|
|
|
Post by Yogi on Sept 27, 2020 19:54:47 GMT 1
|
|
|
|
Post by petehodges on Sept 27, 2020 21:04:02 GMT 1
Is bike standard apart from running gear? Not sure mate,I think it’s got. Mick abbey tune,,Petey over to you 😉 hi mate ,yes as matt says ive had mick abbey tune the barrels then set up on dyno by mutts |
|
|
|
Post by petehodges on Sept 27, 2020 21:38:29 GMT 1
Hey Matt
I’m glad you put a post up mate as I wouldn’t want too take the credit for your hard work 😬
She’s looking great that swinger polished up a treat & the stand looks so much better bet she stands better now & not upright , I’m loving the pics mate
The new owners going to well chuffed! 😆
|
|
|
|
Post by Yogi on Sept 27, 2020 21:40:17 GMT 1
Hey Matt I’m glad you put a post up mate as I wouldn’t want too take the credit for your hard work 😬 She’s looking great that swinger polished up a treat & the stand looks so much better bet she stands better now & not upright , I’m loving the pics mate The new owners going to well chuffed! 😆 Who told you I’d sold it 🤣🤣🤣 |
|
|
|
Post by tell7437 on Sept 28, 2020 22:29:04 GMT 1
What ignition / flywheel set up is fitted, I need to invest in one but need to do a bit of research first .
Nice bike btw,
Cheers Trevor
|
|
|
|
Post by Yogi on Oct 9, 2020 15:28:31 GMT 1
Brake lines all fitted   Along with loads of other bits that I forgot to take pics of Matt 🙈 |
|
|
|
Post by spacejunkie on Oct 9, 2020 17:38:20 GMT 1
Brake lines all fitted Along with loads of other bits that I forgot to take pics of Matt 🙈 Did you have these lines made up ? Where are they from ? |
|
|
|
Post by Yogi on Oct 9, 2020 19:41:35 GMT 1
Yes mate there from Venhill
|
|
|
|
Post by Yogi on Oct 9, 2020 19:42:23 GMT 1
Brake lines all fitted Along with loads of other bits that I forgot to take pics of Matt 🙈 Did you have these lines made up ? Where are they from ? Yes mate there from Venhill👍 |
|
|
|
Post by Tobyjugs on Oct 9, 2020 22:15:55 GMT 1
Looking good Matt.
If it get the full Yogie treatment will Piet have to put his shades on to look at the finished bike?
|
|
|
|
Post by Yogi on Oct 10, 2020 15:09:56 GMT 1
Looking good Matt. If it get the full Yogie treatment will Piet have to put his shades on to look at the finished bike? Pmsl,,no it’s getting done to Petes spec 👍😂 |
|
|
|
Post by Yogi on Oct 10, 2020 15:24:03 GMT 1
Slowly getting there    New genny cover,switchgear decals and head sprayed ,exhausts and hangers fitted and brakes bled ok 👌 Matt 🧸 |
|
|
|
Post by petehodges on Oct 10, 2020 16:24:06 GMT 1
She’s looking great Matt , what a great job your making 👍😎
|
|
|
|
Post by arrdy350 on Oct 11, 2020 18:31:34 GMT 1
Slowly getting there New genny cover,switchgear decals and head sprayed ,exhausts and hangers fitted and brakes bled ok 👌 Matt 🧸 The exhausts look nice with carbon end can's 😀 And the hangers look good are they cut down? |
|
|
|
Post by Yogi on Oct 17, 2020 18:04:14 GMT 1
Well I’m a bit gutted to see this one go   But I think Pete was quite happy to get it back 😃  Matt 🧸 |
|
|
|
Post by midlifecrisisrd on Oct 17, 2020 18:08:58 GMT 1
Nice Job 👍
Do I sense a diversion into an LC project of your own 🤔
Steve
|
|
|
|
Post by Yogi on Oct 17, 2020 18:12:41 GMT 1
Nice Job 👍 Do I sense a diversion into an LC project of your own 🤔 Steve Maybe one day but first I’m building a bigger workshop 🥴 Too many sheds but not enough room, so I’m building another one 🙈 |
|
|
|
Post by dusty350 on Oct 17, 2020 18:51:10 GMT 1
You've done a nice job there mate🙂
|
|
|
|
Post by Tobyjugs on Oct 17, 2020 23:09:22 GMT 1
Top job Matt  |
|
|
|
Post by veg on Oct 18, 2020 16:18:14 GMT 1
Until Pete actually turned up I was going to say is this the classic “asking for a mate” and you’d actually finally seen sense .
I’m in the same boat waiting for my garage to be built. Can’t wait to have back a proper work space.
|
|
Is that a Metmachex swing arm on it? 
