|
Post by noonster on Aug 12, 2020 19:04:08 GMT 1
On the non choke carb,when i turn the fuel tap on.
Fuel flows out of the outlet casting above where the 2-stroke pipe fits just above the square with 31k markings.
Start the bike and its fine.
Could this be float height on that side,chanced float needle, but still the same.
|
|
|
Post by chrisg on Aug 12, 2020 19:07:10 GMT 1
Could be dirt on the needle jet. Give the carb body a tap with a screwdriver handle.
|
|
|
Post by noonster on Aug 12, 2020 19:28:45 GMT 1
Did that first,then tried another float needle
|
|
|
Post by chrisg on Aug 12, 2020 21:39:15 GMT 1
Could be the float height then
|
|
|
Post by 4l04ever on Aug 12, 2020 23:57:16 GMT 1
Needle valve seat o-ring ...
|
|