|
|
Post by oldelsieboy on Aug 8, 2020 12:17:34 GMT 1
Unfortunately not a 900, way too expensive.  OEB (or should that be OZB  ) |
|
|
|
Post by rattler on Aug 8, 2020 12:22:27 GMT 1
Nice. What’s the plan ?
|
|
|
|
Post by oldelsieboy on Aug 8, 2020 12:29:23 GMT 1
Few minor tweaks otherwise leave as is. OEB |
|
|
|
Post by flames on Aug 8, 2020 12:45:46 GMT 1
Nice.😀
|
|
|
|
Post by cb250g5 on Aug 8, 2020 13:21:28 GMT 1
Another one, there's a few of us now. Just put the front wheel in properly in mine, as the speedo drive was loose. Odd arrangement with removable bottoms to the forks and 2 sleeve nuts.
My front brakes are terrible & I have 2 of them, as it's a C1, can't imagine the single disc is up to much?
|
|
|
|
Post by 1966baz on Aug 8, 2020 16:53:59 GMT 1
Unfortunately not a 900, way too expensive. OEB (or should that be OZB ) 650's handle better than 900's and there are cheaper.Another one in the camp.Enjoy. |
|
|
|
Post by dusty350 on Aug 8, 2020 17:15:18 GMT 1
Very nice Nigel  My brother had one just like it (B1 ?) although in a lighter green. Is it an American bike ? Just wondered with regards the bars ? They are a great bike  Dusty |
|
|
|
Post by oldelsieboy on Aug 8, 2020 17:19:09 GMT 1
Very nice Nigel My brother had one just like it (B1 ?) although in a lighter green. Is it an American bike ? Just wondered with regards the bars ? They are a great bike Dusty It is a UK B1 model, think the bars are from a 900. First job will be to swap the bars for a more standard height. OEB |
|
|
|
Post by arrdy350 on Aug 8, 2020 17:54:41 GMT 1
Nice Z650
|
|
|
|
Post by donkeychomp on Aug 8, 2020 21:29:38 GMT 1
Love it!
Alex
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 9, 2020 5:48:14 GMT 1
I love them. They go hard. Here's my mates green one.  |
|
|
|
Post by veg on Aug 9, 2020 13:58:49 GMT 1
First thing I did when I bought my z650 was fit z1 bars it helped that I worked at a kwak dealers at the time. Nck 👍
|
|
|
|
Post by oldelsieboy on Aug 9, 2020 14:55:23 GMT 1
First thing I did when I bought my z650 was fit z1 bars it helped that I worked at a kwak dealers at the time. Nck 👍 Hey Tim, do you think these are Z1 bars?  OEB |
|
|
|
Post by veg on Aug 9, 2020 15:01:18 GMT 1
Hard to 100% from the angle of the pic but I’d say no they aren’t they seem to drop away whereas original z1 bars are high and wide but the grips and switches are parallel to the ground.
|
|
|
|
Post by veg on Aug 9, 2020 15:04:50 GMT 1
Looked at the other picture I’d say no they aren’t at least the previous owners fitted the right cables again from memory you had to fit longer cables as the earlier z650 European bars were relatively low.
Nice looking bike and a proper exhaust 👍
|
|
|
|
Post by oldbritguy on Aug 10, 2020 8:52:02 GMT 1
Lovely
I have had 3 Z650s over the years. Brilliant bikes and go great.
Nice one OEB
Enjoy
|
|
|
|
Post by cb250g5 on Aug 10, 2020 10:00:43 GMT 1
|
|
|
|
Post by midlifecrisisrd on Aug 10, 2020 14:44:08 GMT 1
Very nice 😎
Steve
|
|
smm
L plate rider.
Posts: 30
|
Post by smm on Sept 23, 2020 16:45:48 GMT 1
Have a few in the past cracking bikes 👍
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Oct 18, 2020 23:07:25 GMT 1
That is sweet OEB have not seen one that clean in years Had 2 zeds sold the kz650b about 7 years ago was not near as good of condition as yours and sold my other one z650c project which i have owned 12 years to its original owner who bought it new aged 19 on Saturday never seen a man so delighted to get a bike you know of any for sale over there as have a load of good original parts gathered up to make a nice one to keep Regards Jay   |
|
)
