|
Post by markylc on Aug 16, 2020 19:13:45 GMT 1
had a little tool about with the PV rear end.
|
|
|
Post by flames on Aug 16, 2020 19:34:45 GMT 1
Very nice. Are you ok planning on building a hybrid?
I need an early PV rear wheel, disc, caliper sprocket hub etc if you decide to sell in the future.
|
|
|
Post by markylc on Aug 19, 2020 13:17:24 GMT 1
Very nice. Are you ok planning on building a hybrid? I need an early PV rear wheel, disc, caliper sprocket hub etc if you decide to sell in the future. Sure, I will be moving on all the surplus stuff. I will message you when I have a list together before putting it up for sale.
|
|
|
Post by flames on Aug 19, 2020 14:19:57 GMT 1
Nice one cheers.
|
|
|
Post by markylc on Oct 8, 2020 22:02:32 GMT 1
Thought I would do a little status report on the money pits.
Standardโish LC - UAD The frame and swing arm have been straightened and are currently being powder coated. Engine cases are away being repaired. Crank refurbished. Still need to clean the wheels up - salvage the carbs - send the oil pump off - get paint done. I still need pipes for this......
350 R - PNH Straightened- swingarm in. Waiting for a mod on the yokes before front end can go on. Engine work nearly finished. Got pretty much everything else ready to start the build up.
Ex prody 350LC PKP Got this one stripped and ready to go to motoliner for tweaking. This had the headstock mod done on it and I will most likely leave it that way. This one is going to be more TZ inspired. Parts currently being gathered.
And a new addition of Yogis Hybrid 250. This one is getting there and should be ready for MOT in a couple of weeks. Something to actually ride. Happy days.
|
|
|
Post by flames on Oct 8, 2020 22:23:54 GMT 1
Keeping yourself busy then.๐
When you say headstock mod, is that to sharpen steering up as mentioned in Howard's thread? Never heard of this before.Have read about it twice in one day now.๐ฎ
|
|
|
Post by donkeychomp on Oct 8, 2020 22:46:00 GMT 1
What a great starting point. 3 bikes and now 1 more lol. Going to watch this with interest and good luck with everything!
Alex
|
|
2taol
Thrash Merchant
Posts: 378
|
Post by 2taol on Oct 22, 2020 19:52:37 GMT 1
wow thats a lot going on, a lot of parts and a lot of building, this will be very interesting.
its some task to decide what to do with each bike and to track whats needed.
|
|
|
Post by markylc on Oct 24, 2020 8:59:26 GMT 1
Keeping yourself busy then.๐ When you say headstock mod, is that to sharpen steering up as mentioned in Howard's thread? Never heard of this before.Have read about it twice in one day now.๐ฎ Mine was stretched out a little to make it more stable which worked for me.
|
|
|
Post by markylc on Nov 2, 2020 13:26:48 GMT 1
|
|
|
Post by donkeychomp on Nov 2, 2020 22:37:55 GMT 1
Love that blue side stand!
Alex
|
|
|
Post by markylc on Jan 16, 2021 11:44:34 GMT 1
|
|
|
Post by dusty350 on Jan 16, 2021 11:53:35 GMT 1
Huge transformation there Great work Dusty
|
|
|
Post by midlifecrisisrd on Jan 16, 2021 17:24:29 GMT 1
Looking good ๐
Steve
|
|