peterb
Weekend rider
Posts: 58
|
Post by peterb on Apr 1, 2020 22:38:24 GMT 1
hi any know if the bronze bushes in the lower sliders are still available ?
|
|
|
Post by steven on Apr 1, 2020 23:31:59 GMT 1
|
|
|
Post by steven on Apr 1, 2020 23:36:01 GMT 1
|
|
|
Post by JonW on Apr 2, 2020 0:00:37 GMT 1
I did the same, bought a 40mm bush and cut two from the same one.
|
|
peterb
Weekend rider
Posts: 58
|
Post by peterb on Apr 2, 2020 0:19:10 GMT 1
thanks that just what I wanted to know as I have a couple of sets of legs. ive come across worn out bushes before and all that entails
|
|
|
Post by JonW on Apr 2, 2020 0:24:52 GMT 1
they tend to wear slowly and most are in good nick... but yes it does happen that that do wear in the end.
Ive found that what really kills them are rusty fork legs. When the blisters and then then sharp edges of the flaked holes runs through the Teflon coating it cuts it to pieces.
|
|
peterb
Weekend rider
Posts: 58
|
Post by peterb on Apr 3, 2020 2:25:33 GMT 1
they tend to wear slowly and most are in good nick... but yes it does happen that that do wear in the end. Ive found that what really kills them are rusty fork legs. When the blisters and then then sharp edges of the flaked holes runs through the Teflon coating it cuts it to pieces. hi iam pretty shore they are nackered the chrome on the leg is worn through I doubt the oil was ever changed ?
|
|