bruno2
Weekend rider
Posts: 83
|
Post by bruno2 on Jan 31, 2020 21:12:05 GMT 1
Hi.Ive got an lc frame im getting ready for powder coating and the lock stop on the headstock has been sheared off and lost.I was wondering if somebody could tell me the dimensions of the lockstop so I can make one and get it welded on.
|
|
|
Post by LC_BOTT on Jan 31, 2020 21:45:56 GMT 1
|
|
bruno2
Weekend rider
Posts: 83
|
Post by bruno2 on Jan 31, 2020 22:01:16 GMT 1
thanks very much for that.i take it the stop is welded in the centre of the bottom bearing housing.if you know what I mean.
|
|
|
Post by LC_BOTT on Jan 31, 2020 22:14:37 GMT 1
Yes that's what I did on one of mine, made it slightly longer and ground back after welding to give desired travel. (fitted forks and an old tank, to check)
|
|