|
Post by tsa on Jan 23, 2020 16:29:39 GMT 1
Hi all some scrote has nicked a few of my jigs as I stupidly left them out yesterday. Im in need of some help if anyone who has an LC and a std cigar pipe can help have a look at the pic below it explains it better with a pic. I need this position so I can remake my jig for the LC/YPVS.
|
|
|
Post by stusco on Jan 23, 2020 16:40:33 GMT 1
Thieving b######s
|
|
|
Post by steve h on Jan 23, 2020 16:50:19 GMT 1
FFS No doubt they've been weighed in by now.. b*****ds.
|
|
|
Post by headcoats on Jan 23, 2020 18:57:28 GMT 1
Sorry to hear that Kenny
Make sure the scum don't come back as they tend to do so :-(
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 23, 2020 20:35:58 GMT 1
Hope my bikes safe :-(
|
|
|
Post by rigga on Jan 23, 2020 21:44:58 GMT 1
Not sure if these will help, as only see the center of the washer mark to determine hole center, both pictures taken on the inside face of the hanger..... if I can do it another way that's better, let me know
|
|
|
Post by JonW on Jan 24, 2020 0:14:08 GMT 1
Worth putting up a pic of a jog so people can keep any eye out?
|
|
|
Post by Norbo on Jan 24, 2020 9:32:55 GMT 1
Pikeys driving by may be . or just kids do you think
|
|
|
Post by tsa on Jan 24, 2020 11:33:31 GMT 1
Phil your bikes safe mate. I think it was kids collecting for scrap they couldnt get in anywhere and the dog would have heard if they tried.
rigga in the pics which way round are the pipes?
|
|
|
Post by tsa on Jan 24, 2020 11:34:28 GMT 1
Worth putting up a pic of a jog so people can keep any eye out? Probably already weighed in Jon
|
|
|
Post by rigga on Jan 24, 2020 13:01:13 GMT 1
Kenny
First pic is the inside of the left hand pipe, second pic is the inside of the right hand (Sitting on bike)
|
|
|
Post by 4l04ever on Jan 24, 2020 15:55:21 GMT 1
I have some old standard pipes you can borrow if needed...
|
|
|
Post by tipfinchy on Jan 24, 2020 23:18:04 GMT 1
is it worth a look at any local metal reclaimers mart
|
|
|
Post by 1966baz on Jan 25, 2020 14:30:57 GMT 1
I have cigar type pipes, F2 pipes and allspeeds all not on a bike. I can't drive at the moment as I had an aortic dissection and 2 strokes in june.I you are over this way you are welcome to take measurements.I am in Gloucester.
|
|
|
Post by earthman on Jan 25, 2020 21:08:44 GMT 1
Hi all some scrote has nicked a few of my jigs as I stupidly left them out yesterday. Im in need of some help if anyone who has an LC and a std cigar pipe can help have a look at the pic below it explains it better with a pic. I need this position so I can remake my jig for the LC/YPVS. Would I be right in saying that this pipe may have had a 'cut & shut' at some point, it's been welded back together but is a little shorter? Hence the drill hole to the left, it were the only way to attach it back on the bike??
|
|
|
Post by tsa on Jan 25, 2020 22:03:28 GMT 1
This was a std PV pipe fitted in an LC apparently but I had no idea as to where the Bolt went in the slot to begin with. Thanks all for the help and willingness to assist its much appreciated.
|
|