|
Post by gavink on Oct 5, 2019 6:20:07 GMT 1
Hi Guys, Tried searching threads but nothing came up - what paint are people using to refresh the cylinders? I’ve had mine vapour blasted and are currently being rebored. When back I will need to respect with gloss black rattle cans.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 5, 2019 8:17:13 GMT 1
AFAIK they are satin black
The head however is gloss
Will stand corrected though
|
|
|
Post by Yogi on Oct 5, 2019 8:28:10 GMT 1
|
|
|
Post by mak595 on Oct 5, 2019 8:37:28 GMT 1
And this is how it turned out.... P1020877 P1020878 But im really pissed off with the PJ1 satin engine paint i used on the top case, lifted straight off with petrol Wish id just used the simoniz gloss enamel for that as well, the simoniz stuff is the bollocks
|
|
|
Post by mak595 on Oct 5, 2019 8:39:23 GMT 1
|
|
|
Post by Yogi on Oct 5, 2019 10:32:19 GMT 1
And this is how it turned out.... P1020877 P1020878 But im really pissed off with the PJ1 satin engine paint i used on the top case, lifted straight off with petrol Wish id just used the simoniz gloss enamel for that as well, the simoniz stuff is the bollocks Just painted my lc2 resto lump with Simoniz gloss enamel Matt 🐻
|
|
|
Post by gavink on Oct 5, 2019 18:33:42 GMT 1
thanks for the info guys
|
|
|
Post by mak595 on Oct 5, 2019 19:58:06 GMT 1
I use simoniz enamel for loads of bits now, brackets, brake calipers etc. Bake them in a little oven, 30 mins @ 70°, tough as old boots once baked
|
|