|
Post by simon998 on Sept 23, 2019 14:22:25 GMT 1
I've had my bike sitting 90% built for over a year, the only thing holding me back from finishing it is the state of the current loom.
I've redone the rear from the tank back but the front half has had all the connector blocks cut off and replaced with spade connectors.
I'm wanting to be able to send my current loom (Along with the headlight and switch gear if needs be) to someone and have them finish the wiring.
Anyone here a dab hand with wiring and fancy taking this on? It's a 1985 RD 125 LC (Clocks and front end changed to mk2 items)
|
|
|
Post by LC_BOTT on Sept 23, 2019 16:08:51 GMT 1
Really does sound like it would be cheaper to buy a used loom. There's a good few hours work involved with yours by the sound of it.
|
|
|
Post by looey on Sept 23, 2019 17:23:33 GMT 1
Not sure exactly what you've got/need but I've got a brand new 10W loom (10W-82590-30) I'm just about to list on evil-bay.
|
|
|
Post by mellow on Sept 23, 2019 18:59:22 GMT 1
|
|
|
Post by simon998 on Sept 23, 2019 20:20:00 GMT 1
Not sure exactly what you've got/need but I've got a brand new 10W loom (10W-82590-30) I'm just about to list on evil-bay. I have 10w clocks there so that could work. If you wouldn't mind PM'ing me a price, that'd be great, save with the ebay hassle too.
|
|
|
Post by simon998 on Sept 23, 2019 20:20:38 GMT 1
Not sure exactly what you've got/need but I've got a brand new 10W loom (10W-82590-30) I'm just about to list on evil-bay. I have 10w clocks there so that could work. If you wouldn't mind PM'ing me a price, that'd be great, save with the ebay hassle too. I knew there was a guy a couple of years back but couldnt remember his name! Cheers man.
|
|