|
Post by Yogi on Oct 29, 2019 18:45:31 GMT 1
Black,blue and silver 🤫😂😂
|
|
|
Post by dusty350 on Oct 30, 2019 8:16:47 GMT 1
Looking great Matt Master Cordwell for the paint ?? Dusty
|
|
|
Post by veg on Oct 30, 2019 11:11:11 GMT 1
Like a previous build 😱
|
|
|
Post by Yogi on Oct 30, 2019 11:22:17 GMT 1
Looking great Matt Master Cordwell for the paint ?? Dusty Hi Dusty No I only use Mark for standard paint,this ones gone to Boyztoyz I can then stripe it up as I did in the others Matt 🐻
|
|
|
Post by Yogi on Oct 30, 2019 11:25:56 GMT 1
Veggie boy I was a bit governed by the forks so similar colours but totally different designs In fact I still haven’t worked it out ,until the panels are in there base colour im struggling Matt 🐻
|
|
|
Post by mak595 on Jun 6, 2020 22:49:35 GMT 1
Yogi,
When using the YZF rear wheel, were did you get the sprocket from? As the standard YZF is 428 pitch and i assume its better to run a 520....
|
|
|
Post by Yogi on Jun 7, 2020 7:27:08 GMT 1
Yogi, When using the YZF rear wheel, were did you get the sprocket from? As the standard YZF is 428 pitch and i assume its better to run a 520.... It was already done when I got it and the last owner (Unrealedd)hasn’t been on here for ages He told me he had it made but I can’t remember where , it was a couple of years ago now 🙈 I’ll check for any clues later 👍
|
|
|
Post by midlifecrisisrd on Jun 7, 2020 10:37:54 GMT 1
Yogi, When using the YZF rear wheel, were did you get the sprocket from? As the standard YZF is 428 pitch and i assume its better to run a 520.... B and C express will cut you one from a renthal blank Steve
|
|
|
Post by Yogi on Jun 7, 2020 10:39:39 GMT 1
Yogi, When using the YZF rear wheel, were did you get the sprocket from? As the standard YZF is 428 pitch and i assume its better to run a 520.... B and C express will cut you one from a renthal blank Steve That rings a bell 🔔
|
|
|
Post by mak595 on Jun 7, 2020 19:31:10 GMT 1
Thanks Guys, what teeth at a guess.... 39?
|
|
|
Post by Yogi on Jun 7, 2020 19:34:59 GMT 1
Thanks Guys, what teeth at a guess.... 39? If your using a 17 front then yes that’s standard gearing
|
|
|
Post by mak595 on Jun 7, 2020 20:10:19 GMT 1
Thanks Guys, what teeth at a guess.... 39? If your using a 17 front then yes that’s standard gearing Thanks, now my F1 is finished (and sold to a mate) i'm looking at my RZ chassis again....
|
|
|
Post by mak595 on Jun 12, 2020 23:37:59 GMT 1
Ordered a sprocket from B&C, £46 cut from a 520 blank.
|
|
|
Post by Yogi on Jun 13, 2020 5:53:21 GMT 1
Ordered a sprocket from B&C, £46 cut from a 520 blank. Problem sorted 👍
|
|
|
Post by Tobyjugs on Jun 13, 2020 18:59:45 GMT 1
Black,blue and silver 🤫😂😂 I really liked the colour of the bike you sold to Mutts.
|
|
|
Post by Yogi on Jul 18, 2020 15:29:46 GMT 1
Update time 😉 Still waiting on the bodywork but I have rebuilt the wheels after changing the colour New set of tyres fitted Matt 🧸
|
|
|
Post by dusty350 on Jul 18, 2020 15:42:45 GMT 1
Looking lovely Matt🙂 I really like those wheels😉
Dusty🙂
|
|
|
Post by tacky1 on Jul 18, 2020 15:52:07 GMT 1
The wheel colour changed the look of the bike Matt, Looks great, tied in with the calipers.....
|
|
|
Post by midlifecrisisrd on Jul 18, 2020 16:01:16 GMT 1
Looking good boyo 😎
Steve
|
|
rickymac
Drag-strip hero
Hi all new to this forum and owner of a barn find 250lc
Posts: 224
|
Post by rickymac on Jul 18, 2020 18:30:45 GMT 1
Very nice I do like the twin disc makes me want to change mine now ☹️look forward to seeing more updates
|
|
|
Post by mouse on Jul 19, 2020 7:26:39 GMT 1
Really nice, but for Gawds sake hurry up, what's wrong with you!
ATB Mouse
|
|
2taol
Thrash Merchant
Posts: 378
|
Post by 2taol on Jul 20, 2020 8:48:50 GMT 1
very nice build, I have the same swingarm on my project. I like the silver finish of yours.
|
|
|
Post by Yogi on Jul 20, 2020 15:06:47 GMT 1
Cheers Gang
Dusty/Tacky I couldn’t live with the wheels being a different blue to the forks so I’m glad you think the silvers better👍
Thanks Stevo 😉
Rickymac I couldn’t get on with the single disc,it looked unbalanced to me 🤔
Mouse I’ve been waiting 10 months for the bodywork now so that’s my excuse 🙈👏👏
2taol cheers mate
Matt 🧸
|
|
|
Post by roblc350 on Jul 20, 2020 16:43:39 GMT 1
Looking Great MATT As All yourS Do mate
|
|
|
Post by Yogi on Jul 21, 2020 5:23:16 GMT 1
Looking Great MATT As All yourS Do mate Cheers mate 👍
|
|
|
Post by flames on Jul 21, 2020 7:30:14 GMT 1
LoOKs good already......Can see its going to look fantabulous when it's complete.
|
|
|
Post by shaunthe2nd on Jul 21, 2020 9:14:34 GMT 1
Nice work Matt, as always.
|
|
|
Post by Yogi on Nov 4, 2020 17:05:30 GMT 1
Little teaser 👍 Matt 🧸
|
|
|
Post by mouse on Nov 4, 2020 17:30:36 GMT 1
Oooooh! Come on, come on
Mouse
|
|
|
Post by dusty350 on Nov 4, 2020 17:31:58 GMT 1
Oooh, very nice And different to the norm too Looks a great job. Dusty
|
|