|
|
Post by graeme6 on Jan 28, 2018 19:31:42 GMT 1
Does anyone know if micron ever made a fork brace for the Mk2 RD125LC. Did any other manufacturers make them?
|
|
|
|
Post by jollyr6 on Jan 29, 2018 9:56:32 GMT 1
belive they did do one for mk two have you tried evil bay  ?? |
|
|
|
Post by simon998 on Jan 29, 2018 12:45:35 GMT 1
I've only ever seen one for the mk2 forks, it was on ebay and went for £110 which was a bit much!
|
|
|
|
Post by jollyr6 on Jan 29, 2018 13:07:58 GMT 1
I can get a drawing of one if you know anyone with a cnc to machine you one thats what i was going to do but a kind gent sold me one its for a mk 1 and cost 100 quid
|
|
|
|
Post by graeme6 on Jan 29, 2018 20:37:11 GMT 1
Could get one made if you have a drawing you can let me have, needs to be for a mk 2 as I believe forks were different sizes on mk1 and mk2.
|
|
|
|
Post by broughton on Jan 29, 2018 22:30:05 GMT 1
mk2 forks are thicker, when i fitted a fork brace to my mk1 it improved the handling no end.
|
|
|
|
Post by jollyr6 on Jan 30, 2018 13:13:29 GMT 1
Could get one made if you have a drawing you can let me have, needs to be for a mk 2 as I believe forks were different sizes on mk1 and mk2. I think the one broughton has on his is a mk 2 type ill compare to mine when i get a miniute to get over to his and do you a drawing |
|
|
|
Post by simon998 on Jan 31, 2018 11:21:28 GMT 1
If anyone could upload a drawing/template for the mk2 one also that'd be great.
|
|
|
|
Post by jollyr6 on Feb 10, 2018 18:49:44 GMT 1
I'll get round to it been busy fabbing exhaust up
|
|
|
|
Post by graeme6 on Feb 18, 2018 13:04:28 GMT 1
bump
|
|
|
|
Post by graeme6 on Apr 28, 2018 18:40:23 GMT 1
Did you ever get that drawing mate?
|
|
|
|
Post by jollyr6 on Apr 30, 2018 13:18:32 GMT 1
Did you ever get that drawing mate? no remind me MK1 or mk2 ?? |
|
|
|
Post by graeme6 on Apr 30, 2018 18:01:54 GMT 1
Mk 2 please, someone at work can make me one if I have the dimensions
Thanks
|
|
??