|
Post by Mr Kipling on May 19, 2018 20:27:54 GMT 1
It's almost like the frame is made for that engine Why do you need a chain roller. Is this something to do with the swing arm pivot position Yeah its good fit , helps keep chain away from frame due to where sprocket sits...
|
|
|
Post by andy71330 on May 19, 2018 20:42:52 GMT 1
That is one beast of a bike, love it, excellent work buddy
|
|
|
Post by Mr Kipling on May 21, 2018 21:16:41 GMT 1
I,m starting too realize that riding this as a street bike (arse up wrist down) really isn,t going too happen for me , I have the other one too build as a Streetfighter I,m hoping too ride at some point which is leaving me in a bit of a pickle with this one do I finish or depart with it ..Do I pop the tyga kit on it an sell whole or do I remove the Mootah an sell as a rolling chassis...Will I miss it YES do I need it NO ..
|
|
|
Post by Tobyjugs on May 21, 2018 21:32:27 GMT 1
Get it up and running for the special event, use it and this will generate intetest and put a for sale sign on it Just don't bin it on the track.
|
|
|
Post by jon on May 22, 2018 18:48:23 GMT 1
I now realise I’ve been confused between your two build threads.
However, have you not regularly changed photos and titles of both?
I could have sworn I saw one of them with risers and conventional handlebars? Was it this one? If not why has the title got streetfighter in it? I thought that meant changing from drops to bars amongst other things?
Jon
|
|
|
Post by marrcel on May 22, 2018 19:45:47 GMT 1
Looks to me RD-Lego. I like both🤗
|
|
|
Post by Mr Kipling on May 22, 2018 20:22:05 GMT 1
I could have sworn I saw one of them with risers and conventional handlebars? Was it this one? If not why has the title got streetfighter in it? I thought that meant changing from drops to bars amongst other things? Jon Hi bud , yeah this one was originally a streetfighter had ape forks with renthals gas mask etc , but now gone full circle street/track use... I just haven,t changed the thread title " Yet " ::)
|
|
|
Post by Mr Kipling on May 25, 2018 18:41:38 GMT 1
Took delivery of a few other bits today , couple of battery straps ( one for each bike ) and a new cush drive spacer seal
|
|
|
Post by Mr Kipling on May 27, 2018 2:03:38 GMT 1
|
|
|
Post by donkeychomp on May 27, 2018 2:24:32 GMT 1
Stonking bike and I think I have the same lid! But why does the front light unit look like a gas mask?
Alex
|
|
|
Post by Mr Kipling on May 27, 2018 8:59:21 GMT 1
Stonking bike and I think I have the same lid! But why does the front light unit look like a gas mask? Alex Cause it is , after all its an oil burning smoky 2stroke !!!!!
|
|
|
Post by wallcraft on May 27, 2018 10:41:29 GMT 1
Absolutely top draw, that's what you call a hybrid, best on here by far in my opinion.
Mark.
|
|
|
Post by Mr Kipling on May 27, 2018 19:44:38 GMT 1
Absolutely top draw, that's what you call a hybrid, best on here by far in my opinion. Mark. Many thxs,,, :D
|
|
|
Post by donkeychomp on May 27, 2018 20:42:45 GMT 1
Stonking bike and I think I have the same lid! But why does the front light unit look like a gas mask? Alex Cause it is , after all its an oil burning smoky 2stroke !!!!! hahaha nice one
|
|
|
Post by gammaguy21 on May 28, 2018 15:01:24 GMT 1
Love it! Well done sir!
|
|
|
Post by Mr Kipling on May 28, 2018 21:37:21 GMT 1
Searched high n low n everywhere in between but still the P/V Cables elude me so decided to sort the master cylinder bracket n bleed the front brakes , Was using TZR 125 P/V Cables ( pretty long ) too allow me mount the servo where I wanted , I have a new set of TZR 250 P/V Cables so been busy making a new bracket too mount the servo as there considerably shorter , this I,ll finish off tomo ...Whilst I was there I removed the rad so I can have a blind mount welded on to help secure my R6 fan too.. Checked all the electrical system today , nice spark to the plugs,,, all in all pretty happy just need me exhausts back now , counting down the days !!!!
|
|
|
Post by Mr Kipling on Jun 2, 2018 19:23:59 GMT 1
After painstakingly making a nice servo bracket realised cables were too long so refitted old n seen better days bracket ...And too top it off whilst over the lock up today found the original P/V Cables while digging out a set of side by side exhausts!!
|
|
|
Post by donkeychomp on Jun 2, 2018 22:04:57 GMT 1
That's handy they cost a bit now!
Alex
|
|
|
Post by Mr Kipling on Jun 2, 2018 23:39:39 GMT 1
That's handy they cost a bit now! Alex Yes getting pricey nowadays ... I got some DTR P/V Cables kicking about here somewhere , I think there work out quite well with the new servo mount.... ::)
|
|
|
Post by Mr Kipling on Jun 4, 2018 15:12:15 GMT 1
|
|
|
Post by Tobyjugs on Jun 4, 2018 15:53:33 GMT 1
Oh no whats happened to my favourite build???
|
|
|
Post by Mr Kipling on Jun 4, 2018 16:51:19 GMT 1
Oh no whats happened to my favourite build??? In true me style , couple last minute changes and I want too re-powdercoat the engine cradle n a few other bits whilst I,m at it..... :D
|
|
|
Post by Tobyjugs on Jun 4, 2018 17:21:43 GMT 1
Thats ok we can watch another rebuild
|
|
|
Post by Mr Kipling on Jun 4, 2018 18:25:19 GMT 1
Underwent a bit of shock therapy today , ended up a few shades lighter !!!
|
|
wiff
L plate rider.
Posts: 22
|
Post by wiff on Jun 6, 2018 19:48:48 GMT 1
beautifull bitta kit
|
|
|
Post by Mr Kipling on Jun 7, 2018 21:42:10 GMT 1
Question for peeps , Powdercoat Frame n Swingarm satin black or leave polished ???? I wanna have the rolling chassis as good as poss b4 it maybe goes to a new home....
|
|
|
Post by donkeychomp on Jun 7, 2018 21:50:20 GMT 1
Polished without a doubt
Alex
|
|
|
Post by Tobyjugs on Jun 7, 2018 22:15:12 GMT 1
I would go for a brushed aluminium look or in 2nd place satin a black paint. I'm not such a fan of powder coating frames. I'm sure what ever you do it will be nice
|
|
|
Post by 4l04ever on Jun 7, 2018 23:12:22 GMT 1
Polished! :-)
|
|
|
Post by jon on Jun 8, 2018 7:49:34 GMT 1
Question for peeps , Powdercoat Frame n Swingarm satin black or leave polished ? I wanna have the rolling chassis as good as poss b4 it goes to a new home.... IF it’s ‘going to a new home’ as in being sold, surely the new owner should choose? Jon
|
|