sorry it's been a while but had to wait for this one off sprocket to be machined, well tonight I shall be throwing an engine in to see if it all lines up, there's about 5mm on the rear carrier to play with if not but fingers crossed it will be fine.
Nice straight looking run there, who made the sprox? This is going to be pretty radical.
Sprockets unlimited, 1 off sprocket £38 absolutely chuffed with their help. They supplied chain also and I only gave them centre to centre measurements, this has 116 links, think we'll fit a spring roller near the front to take up the slack when it's static, otherwise well happy.
Update, not touched this since last year as waiting for an exhaust date. Having finally got a new date for some exhausts its back on the bench. Those were in a right old state, all the bolts sheared and I almost threw them away. Now back together with a metallic purple touch.
Headlamp ears made and halo light fitted.
Engine fitted and running with test bodywork on, running pods but using a modded airbox to keep the X7 look, needs adjusting as frame widened so top mounts to move forward. painter sorting tank as lock stops had gone and dented it. front muddy cut down and all in primer. Seatbase prepped and cut to suit pod, undertray to make still.
Had a couple of hours tonight, had to butcher the inner part to allow the light to be adjustable in or out, now the brackets have been sorted it's time to make a mk2 and an undertray to sort the rear end.