jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 4, 2013 22:46:01 GMT 1
reflecter bracket blasted and painted will get new one at later date as something just don't look right with it front indies put together ready to fit
|
|
guernseyrob
L plate rider.
1986 350 YPVS N1 & 1985 350 31k YPVS
Posts: 39
|
Post by guernseyrob on Jun 7, 2013 0:45:55 GMT 1
Great thread mate, watching other peoples rebuilds really motivates me to get those boxes of parts out and actually get going sorting out my own so I can actually ride it this year!
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 7, 2013 23:09:35 GMT 1
had to grind washer that was welded on to gear selector pin to remove old gear linkage to make way for new one as was badly wore and rusted, so drilled and tapped it so to keep it in place with bolt, temporary job till get new pin and kit clutch mech and cable fitted exhaust studs fitted temp sender spade soldered and fitted as was hanging on by thread new levers and bolts fitted
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 8, 2013 0:12:23 GMT 1
Great thread mate, watching other peoples rebuilds really motivates me to get those boxes of parts out and actually get going sorting out my own so I can actually ride it this year! cheers mate hoping to get spin on mine before summer ends too
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 9, 2013 0:36:50 GMT 1
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 10, 2013 0:01:33 GMT 1
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 14, 2013 2:43:52 GMT 1
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 23, 2013 22:00:01 GMT 1
|
|
|
Post by kennyroberts on Jun 23, 2013 22:33:52 GMT 1
Its motoring along now....wont be long till its on the road at this rate......good read!
|
|
|
Post by jmartin on Jul 19, 2013 22:56:06 GMT 1
Looking good, nice site all those yamaha packets !
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jan 21, 2019 12:54:35 GMT 1
Been a while since done bit in shed so had to go back to bare frame for some welding as centre stand mount bar was doctored and couldn't get one at time but have one now kr.com/7879/46824803831_94fdaf0138_b.jpg[/img][/url] IMG_154739796011F by
IMG_154739796011F by
IMG_154739798075F by
|
|
|
|
Post by jon on Apr 21, 2019 13:07:49 GMT 1
I assume it’s the one on the right in the above picture you made as the foot pipe is slightly more of an angle?
Amazing job you’ve done on that to make it look like the original.
Jon
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Apr 22, 2019 0:47:00 GMT 1
I assume it’s the one on the right in the above picture you made as the foot pipe is slightly more of an angle? Amazing job you’ve done on that to make it look like the original. Jon thanks jon the one one the left is the made one and the one on the right is original but is slightly twisted / damaged and was repaired badly as its not sitting right on bike its off .ive mocked mine up on 2 bikes and sits fine on certre stand position and up against exhaust
|
|
|
Post by bezzer on Apr 22, 2019 12:12:08 GMT 1
I assume it’s the one on the right in the above picture you made as the foot pipe is slightly more of an angle? Amazing job you’ve done on that to make it look like the original. Jon thanks jon the one one the left is the made one and the one on the right is original but is slightly twisted / damaged and was repaired badly as its not sitting right on bike its off .ive mocked mine up on 2 bikes and sits fine on certre stand position and up against exhaust Good skills to make a centre stand Jay 👍🏻. Bike is looking good - up and running for summer 🤗!!
|
|
|
Post by jon on Apr 22, 2019 15:19:06 GMT 1
thanks jon the one one the left is the made one and the one on the right is original but is slightly twisted / damaged and was repaired badly as its not sitting right on bike its off .ive mocked mine up on 2 bikes and sits fine on certre stand position and up against exhaust Good skills to make a centre stand Jay 👍🏻. Bike is looking good - up and running for summer 🤗!! I made a centre stand for my LC hybrid, although didn’t have to make it look original. rdlccrazy.proboards.com/post/203460/thireadTook me a month of Sunday’s literally. For that reason I’ll keep it for my latest hybrid, although I do have an OEM one to powder coat to match and replace. Jon
|
|
|
Post by bezzer on Apr 22, 2019 15:35:39 GMT 1
Good skills to make a centre stand Jay 👍🏻. Bike is looking good - up and running for summer 🤗!! I made a centre stand for my LC hybrid, although didn’t have to make it look original. rdlccrazy.proboards.com/post/203460/thireadTook me a month of Sunday’s literally. For that reason I’ll keep it for my latest hybrid, although I do have an OEM one to powder coat to match and replace. Jon Just looked at the link to your build thread Jon, hats off to you fella, a beautiful piece of fabrication. It never ceases to amaze me the level of talent of some of the members on this superb forum 👍🏻 Long may they reign 🤗
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Apr 24, 2019 7:34:08 GMT 1
thanks jon the one one the left is the made one and the one on the right is original but is slightly twisted / damaged and was repaired badly as its not sitting right on bike its off .ive mocked mine up on 2 bikes and sits fine on certre stand position and up against exhaust Good skills to make a centre stand Jay 👍🏻. Bike is looking good - up and running for summer 🤗!! Thanks Bezzer hope to have it ready for the summer all going well
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Apr 24, 2019 7:39:30 GMT 1
Good skills to make a centre stand Jay 👍🏻. Bike is looking good - up and running for summer 🤗!! I made a centre stand for my LC hybrid, although didn’t have to make it look original. rdlccrazy.proboards.com/post/203460/thireadTook me a month of Sunday’s literally. For that reason I’ll keep it for my latest hybrid, although I do have an OEM one to powder coat to match and replace. Jon Nice work Jon looks deadly
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 10, 2019 23:45:44 GMT 1
Back to rolling frame swing arm and shock repainted and fitted. front end, rear wheel and centre stand on IMG_20190610_223136 by [url=https://www.flickr.com/photos/167701212@N02/
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on May 10, 2020 15:55:53 GMT 1
Got my engine back from my mate Gerry during the week after some repair wort on the sidecase 😀now to do some painting to tidy it up
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on May 10, 2020 16:53:32 GMT 1
Picture that wouldn't load for last post 😀
|
|
|
Post by rattler on May 10, 2020 19:02:54 GMT 1
Great work - I love reading these build threads !!
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 2, 2020 0:56:27 GMT 1
|
|
|
Post by dusty350 on Jun 2, 2020 7:49:33 GMT 1
Looking good Jay, getting there now Your mate did a nice job of the case repair. Looks a lot stronger than original. Dusty
|
|
|
Post by shaunthe2nd on Jun 2, 2020 8:42:53 GMT 1
Great work, its coming along well and always like to see another 2-stroke heading back to the road. Love your commitment, I see that your build started in 2013, should be finished within next few years.
|
|
|
fabiostar
Thrash Merchant
the older i get the faster i was.
Posts: 382
|
Post by fabiostar on Jun 21, 2020 0:07:20 GMT 1
brilliant read..
|
|
|
Post by rattler on Jun 21, 2020 9:53:45 GMT 1
Great work. Love watching these threads and the bike builds.
|
|
jay
Thrash Merchant
2 stroke or not 2 stroke
Posts: 419
|
Post by jay on Jun 28, 2020 0:08:14 GMT 1
Few bits from Norbo arrived something to keep me busy during my days off work during the week 😁👍
|
|