|
Post by JonW on Sept 17, 2021 14:08:43 GMT 1
Cried in my beer this evening cos of this: Full story in my 251LC build thread
|
|
|
Post by engineer on Sept 17, 2021 14:20:56 GMT 1
Stole this from the fz1 forum & is an on going thing over there All you do is post what you did to your bike , keep it as long or as short as you like / with or without pics ,,, it dosent matter It may or may not catch on its up to you ! ! I'll go first . Drained float bowls / cleansed fuel tap & replaced inline filters Fitted pattern main stand and had to lower stops on stand by 6mm. Sick of this Chinese crap and the Muppets who sell it. Fitting main stand spring next.
|
|
|
Post by wonkywheel on Sept 20, 2021 22:05:05 GMT 1
MOT on the Brazilian Babe with a 50 mile ride home on twisty B roads π
|
|
busby
Weekend rider
RD 350 4l0
Posts: 87
|
Post by busby on Sept 22, 2021 20:11:24 GMT 1
Got the paperwork back from the dvla for the registration plate. Happy daysπ
|
|
|
Post by arrdy350 on Sept 23, 2021 19:32:38 GMT 1
Cleaned and oiled my cylinders again to stop them from going rusty.
|
|
|
Post by doohanno1 on Sept 24, 2021 13:38:51 GMT 1
Just swapped out the old ( right) for new ( left)..
|
|
|
Post by tacky1 on Sept 27, 2021 14:39:04 GMT 1
|
|
|
Post by markrd250lc on Sept 27, 2021 15:29:45 GMT 1
Drained the LC/RXS/DT50 & R1 of petrol so son & daughter in law and baby had petrol to go on holiday, not sure how they will get back
|
|
|
Post by geoffers997 on Sept 29, 2021 9:22:26 GMT 1
Zipped the liner back into my jacket. Autumn is upon us π
|
|
|
Post by jessy03 on Oct 2, 2021 15:25:35 GMT 1
Fitted a billet Cush drive, donβt have to worry about the old one breaking up.
|
|
|
Post by puddy on Oct 4, 2021 18:06:18 GMT 1
Gave it a wash after a 2t rally in and around sussex yesterday , crossed small streams , avoided loads of debris in the lanes , got caught in a downpour on the a3 on the way home , fantastic fun ! What we used to with our lc's bitd , not just sit at home and check the prices on ebay. Puddy
|
|
|
Post by pdxjim on Oct 4, 2021 19:51:36 GMT 1
Did a trackday Saturday at the local kart/supermoto track.
Brought the LC and TDR. TDR was brilliant as always, but the sloppy trans linkage made the LC and missed downshifts at the end of the front straight a truly frightening experience
Had a go on a friends KTM 690SMCR and have decided I need one in my garage.
LC for sale soon!
|
|
|
Post by mouse on Oct 8, 2021 15:31:09 GMT 1
Picked up my new steering damper mount from the anodisers, lovely job!
Mouse
|
|
|
Post by bare on Oct 8, 2021 17:01:28 GMT 1
Heavy spritz of Fogging oil in each Cylinder. Wet cold season has arrived.
|
|
|
Post by beardy on Oct 8, 2021 18:19:57 GMT 1
Whilst out on my cbf600 this morning. Slid off down a country lane thinking glad Iβm not on my LC ππ»
|
|
|
Post by donkeychomp on Oct 8, 2021 21:15:25 GMT 1
Yikes! Are you okay?
Alex
|
|
|
Post by tacky1 on Oct 8, 2021 22:45:09 GMT 1
Swapped out the fork springs, I fitted wayyyy to light a spring and it was awful to ride, Fitted the new ones and made up new spacers and all good, soo much better, Then an 80 mile test ride, beautiful day out, Might be time to swap the 35mm carbs for a set of PWKs, zero low end on it, like nothing!!!!
|
|
|
Post by beardy on Oct 9, 2021 8:41:10 GMT 1
Thanks for asking. Just a twisted ankle. Annoyingly my gear change one so may have to postpone a BoxHill run tomorrow. The bike escaped any serious damage too ππ» Steve
|
|
|
Post by mouse on Oct 9, 2021 9:56:29 GMT 1
Thanks for asking. Just a twisted ankle. Annoyingly my gear change one so may have to postpone a BoxHill run tomorrow. The bike escaped any serious damage too ππ» Steve Glad you're ok Mouse
|
|
|
Post by 3tj6 on Oct 9, 2021 20:31:48 GMT 1
Got mine ready for a run out tomorrow, weather permitting going to the barge at newark π
|
|
|
Post by 3tj6 on Oct 10, 2021 19:01:39 GMT 1
Weather was good so did a 100 miles running in , no more than 5 k , my mate said one cylinder seemed to smoke more than the other π€·ββοΈAny ideas anyone ? Was good to have a run out on my lc hybrid now finally finished , made me have a big smile on my face π, thanks to muttsnutts for the engine rebuild, Redbimota for many parts , jonw for the wiring loom , arrow for the oil pump, 4lo forever for the side panels and tail piece , thanks to Dusty for the footrest hangers , and to anyone who has given me advice while building the bike over the last 5 years, thanks Jon π
|
|
|
Post by JonW on Oct 12, 2021 4:26:58 GMT 1
Glad to hear your project is on the road mate!
which side smoked more? whos crank seals have you fitted?
|
|
mt
Thrash Merchant
Posts: 489
|
Post by mt on Oct 14, 2021 15:48:46 GMT 1
Made a start putting the engine together for the next Ypvs 55 by Gary Woodward, on Flickr
|
|
|
Post by copper99 on Oct 15, 2021 16:06:04 GMT 1
Thanks for asking. Just a twisted ankle. Annoyingly my gear change one so may have to postpone a BoxHill run tomorrow. The bike escaped any serious damage too ππ» Steve Sorry to read that as well mate..at least it wasnt to bad...and at the end of the season!
|
|
|
Post by bare on Oct 15, 2021 16:26:07 GMT 1
oops.
|
|
|
Post by tacky1 on Oct 16, 2021 23:03:52 GMT 1
Brought the RC out for a good blast, f**kin love this thing,,,,,,
|
|
|
Post by copper99 on Oct 18, 2021 19:52:12 GMT 1
Brought the RC out for a good blast, f**kin love this thing,,,,,, Fantastic collection you have there mate. If you had to keep just one, what would it be?!
|
|
|
Post by tacky1 on Oct 19, 2021 2:53:42 GMT 1
Brought the RC out for a good blast, f**kin love this thing,,,,,, Fantastic collection you have there mate. If you had to keep just one, what would it be?! I canβt pick between the RC30 and the Skoal 500. The other 500s I have no attachments to. I ride them, but the skoal and the RC are the 2
|
|
|
Post by copper99 on Oct 19, 2021 10:26:33 GMT 1
Fantastic collection you have there mate. If you had to keep just one, what would it be?! I canβt pick between the RC30 and the Skoal 500. The other 500s I have no attachments to. I ride them, but the skoal and the RC are the 2 Hard to argue with that..
|
|
|
Post by copper99 on Oct 30, 2021 9:51:34 GMT 1
|
|