|
|
Post by daz on Dec 23, 2005 18:29:24 GMT 1
What sort kit do you need to make brackets out of alloy.Is the kit to expensive to buy as i wont to make some adapter brackets to fit 4 pot gsxr calipers to mr rd.
|
|
|
|
Post by Norbo on Dec 24, 2005 10:32:14 GMT 1
Its nothing special just pop over to your alloy suplyer and get a pice of 8mm thick alloy 5" X 3" and that should be right. Then you just make the bracket as a flat pice and make some bushes to space it out . The alloy will cost about £3 .
|
|
|
|
Post by daz on Dec 24, 2005 11:35:22 GMT 1
Thanks for fast replie will get some blanks in the new year
|
|
|
|
Post by daz on Dec 24, 2005 14:33:48 GMT 1
how much for a couple of 10mm thick pieces
|
|
|
|
Post by daz on Dec 24, 2005 17:31:13 GMT 1
5"x3" blanks i need 2 they are for caliper brackets
|
|
|
|
Post by Norbo on Dec 25, 2005 13:35:08 GMT 1
Its nothing special just pop over to your alloy suplyer and get a pice of 8mm thick alloy 5" X 3" and that should be right. Then you just make the bracket as a flat pice and make some bushes to space it out . The alloy will cost about £3 . hi norbo if you can get alloy that cheap ill get some stock from you !! I just get them from NAFCO in sutton in ashfield they have small bits in a box and they don't cost a lot. If they had to cut a bit of a big sheet it would cost more i would asoom. |
|
