|
Post by marrcel on Oct 19, 2023 17:39:12 GMT 1
Let's look at the bright sight of this 2stroke forum. Our RDs are low NOx because of the low burning temperature. Be happy that they are not looking for CxHy or particals like pm2.5. So my 98gsxr would fail because of NOx and my 83ypvs would comply, so happy days.
|
|
|
Post by marrcel on Apr 2, 2023 10:36:39 GMT 1
|
|
|
Post by marrcel on Apr 2, 2023 10:35:52 GMT 1
Spring is in the air.
|
|
|
Post by marrcel on Dec 11, 2022 21:42:27 GMT 1
Change the coil and spark plug caps first
|
|
|
Post by marrcel on Nov 22, 2022 23:51:33 GMT 1
Yes, and they do sound different. I prefer the hi tone myself. I've never understood why 2 horns on the 350, can only be aesthetics. Two different tones like 270Hz and 300Hz give a wide spectrum of tones. If you have just one tone it is difficult to locate it. Its like the refrigerator in the kitchen you can hear it just on a few places. A wider spectrum is easier to locate with our two ears. So in my opinion science rules over looks🤫
|
|
|
Post by marrcel on Nov 22, 2022 22:10:54 GMT 1
I just got a message an hour before the meeting. Otherwise i had let you know Tony😉
|
|
|
Post by marrcel on Nov 22, 2022 22:09:28 GMT 1
|
|
|
Post by marrcel on Nov 14, 2022 8:26:33 GMT 1
|
|
|
Post by marrcel on Nov 6, 2022 20:21:33 GMT 1
It is a joy to read your adventures Tony😋
|
|
|
Post by marrcel on May 7, 2022 19:11:06 GMT 1
I used a 4mm elastic cord. Just drill holes beside the lug. Works for 25 years now.
|
|
|
Post by marrcel on May 3, 2022 20:45:06 GMT 1
Gave it the beans at Zandvoort
|
|
|
Post by marrcel on Apr 15, 2022 18:11:54 GMT 1
f**k the clipps
|
|
|
Post by marrcel on Mar 17, 2022 23:12:29 GMT 1
Well at the mo your beam is curved down. Take it of and other way around so it's curved up. Then you have to change the pedal the other way from inwards to outwards. Hope you can visualize that
|
|
|
Post by marrcel on Mar 12, 2022 19:15:47 GMT 1
Another idea is to flip the arm upside down.
|
|
|
Post by marrcel on Jan 8, 2022 19:59:56 GMT 1
My bike is far more superior than yours😉
|
|
|
Post by marrcel on Dec 26, 2021 14:12:27 GMT 1
Gilf🤭🤔
|
|
|
Post by marrcel on Dec 12, 2021 10:44:34 GMT 1
Just attact the nuts again🧐 The threats are different. So installed the cut washer again under the lock washer.
|
|
|
Post by marrcel on Dec 12, 2021 9:18:29 GMT 1
Thanks Tony I accidentally switched the input and output locknuts. You saved a built again🤗
|
|
|
Post by marrcel on Dec 11, 2021 15:36:41 GMT 1
I cut a washer for an 8 plate clutch. Hi Marrcel what was the reason for cutting the locking tab? I placed a thinner washer inside of the hub. This shift the plates more inwards. This gives more room for the 8th plate. I placed the cutted washer between the locked washer and the face of the hub. Now the nut pushes on the face instead of the splines. The explanation of Steve hits the nail😉
|
|
|
Post by marrcel on Dec 11, 2021 15:05:13 GMT 1
Thread and splines are same size. The nut with both sides flat is at the input shaft. The nut with one side with a depth is at the output shaft.
|
|
|
Post by marrcel on Dec 10, 2021 21:12:29 GMT 1
I'd guess it's because he has reduced the inner hub with a thinner thrust washer the splines are proud of the hub face the centre bolt mates with Steve I am not sure if my english but the bolt hit the splines instead of the hub.
|
|
|
Post by marrcel on Dec 9, 2021 19:44:52 GMT 1
I cut a washer for an 8 plate clutch.
|
|
|
Post by marrcel on Dec 6, 2021 21:31:19 GMT 1
I am glad to see some pictures of your progress. How did you made the dry casing? My 8 plate clutch is finished but not installed. Before i change the 7 plate clutch i will test some stiffer springs first.
|
|
|
Post by marrcel on Nov 27, 2021 22:16:03 GMT 1
I love a Glen Lossie single malt. The indian restaurants in Oban and some in Wales are 👍
|
|
|
Post by marrcel on Nov 27, 2021 22:12:38 GMT 1
I binned my oem 31k wheels. But i have the discs for sale. I don't need them on my hybrid. But my spare engine is not for sale. I want to drive my hybrid until i die😉
|
|
|
Post by marrcel on Nov 13, 2021 23:13:11 GMT 1
How thick are your barrel gaskets ? And how do you torque the head up? I did the same as oem with my oringed head.
|
|
|
Post by marrcel on Nov 8, 2021 22:51:47 GMT 1
I run my ypvs with igni and full led. 75W will be more then enough i recon. 🤔
|
|
|
Post by marrcel on Nov 3, 2021 20:54:13 GMT 1
I surfed at white sand bay StDavids. With a small kayak. I enjoyed the ocean swell a lot!
|
|
|
Post by marrcel on Oct 30, 2021 14:00:36 GMT 1
I made a remote choke cable for my pwk30's.
|
|
|
Post by marrcel on Oct 22, 2021 12:18:42 GMT 1
I thought about a ziptied splitted mtb inner tube.
|
|