|
Post by steve63 on Nov 9, 2022 0:04:57 GMT 1
I have a set of plans for one if anyone fancies getting the welder out I would be interested in seeing them. We are moving premises at work in a month or so and they're having a bit clearout. I've got a stack of various steel sections and have my eye on some box section in the yard. I'm not going to miss this opportunity to build up my stock
|
|
|
Post by JonW on Nov 9, 2022 0:25:10 GMT 1
I do think this would be an easy enough DIY project. Its a lot of bits but pretty simple in design and the chinese welding isnt always that special so DIY is about right lol. Lots of hydraulic rams for sale or in older jacks etc.
There are some air assisted ones out there as well, but not for me as I dont run a compressor all the time and I suspect most of us are like that.
|
|
|
Post by Gunny on Nov 9, 2022 16:51:31 GMT 1
Should be in this album, the plans and cutting list are for angle iron, but you`ll see the photos of the one my mate made, he used box section instead Cutting list included as well flic.kr/s/aHBqjAeoEYDSCN2308 by Gunny Scotland, on Flickr
|
|
|
Post by steve63 on Nov 9, 2022 19:55:01 GMT 1
That's great, thanks
|
|