mt
Thrash Merchant
Posts: 489
|
Post by mt on Nov 21, 2019 18:21:27 GMT 1
I'm going to be looking for some aftermarket expansion pipes for my N2 soon...ish. Moving the bike into the house for winter, got the engine to rebuild and paintwork should be getting done soon. The plan is to have it ready for spring so no rush. The Micron Gp's that the bike came with are not going back on as I want one either side. I'm thinking stainless pipes. What pipes are you Ypvs guys using and what are your opinions of them for Quality, Fit & Sound ? Any pics of them fitted would be good Gary
|
|
|
Post by Dixie Dean on Nov 21, 2019 18:40:54 GMT 1
Mutts nutts does a nice pair of stainless pipes.
|
|
|
Post by dusty350 on Nov 21, 2019 18:58:31 GMT 1
This is a pair of stainless pipes Dave (Mutts) developed for the Lc, with his 6 inch alloy cans. Very light, beautifully made and super quick delivery - less than 2 weeks !! Bolt straight on and sound... 20190320_150841 by dusty miller, on Flickr These are TSA's in stainless, with Dave's 6" cans. Again, very light, beautifully made and fit perfectly. I know it's an Lc but it's an F2 Pv engine, and they sound... 20191109_134347 by dusty miller, on Flickr Not the best recording as it's in the garage - first time start up - they sound very like Dave's pipes but probably due to the cans being the same. Dusty
|
|
|
Post by jessy03 on Nov 21, 2019 19:03:42 GMT 1
Kennys or Mutts work well
|
|
|
Post by midlifecrisisrd on Nov 21, 2019 19:21:14 GMT 1
Mutts or TSA for me too
I'll try and find pics
Steve
|
|
|
Post by midlifecrisisrd on Nov 21, 2019 19:25:09 GMT 1
TSA Steve
|
|
|
Post by midlifecrisisrd on Nov 21, 2019 19:27:36 GMT 1
Mutts still in bags lol
|
|
|
Post by midlifecrisisrd on Nov 21, 2019 19:29:44 GMT 1
Mutts one offs too Steve
|
|
mt
Thrash Merchant
Posts: 489
|
Post by mt on Nov 21, 2019 19:31:28 GMT 1
Certainly tempted by Mutts pipes and heβs only 40 miles away ππ»
|
|
|
Post by marrcel on Nov 21, 2019 19:36:01 GMT 1
SS Oleee
|
|
|
Post by jessy03 on Nov 21, 2019 19:36:09 GMT 1
No brainier then get some off Dave.
|
|
|
Post by tsa on Nov 22, 2019 14:40:03 GMT 1
|
|
|
Post by Norbo on Nov 22, 2019 14:56:32 GMT 1
If you need a set i have some with lovely TZ carbon end cans you can see them on the site . No hanging about in stock and made for mid range power in st/st and milled steel.
|
|
|
Post by nobby62 on Nov 24, 2019 22:04:57 GMT 1
Love the look of those stainless welded section pipes, they all look good.... very tempting
|
|