|
|
Post by Yogi on Sept 30, 2019 9:44:38 GMT 1
|
|
|
|
Post by rigga on Sept 30, 2019 9:47:36 GMT 1
Now who would pay £900 for a loom, instead of a very decent copy from the LC club for a couple of hundred instead? Madness
Also I'm Pretty sure LC and 31k looms are not the same at all.
|
|
|
|
Post by Norbo on Sept 30, 2019 11:12:31 GMT 1
Madness
|
|
|
|
Post by JonW on Sept 30, 2019 13:09:32 GMT 1
The Lc club looms are discontinued I found out last week.
And no, the 31K and LC looms are not the same.
Thats the second 31K NOS loom Ive seen advertised at that price actually. NOS always has a different value to anything else as we know. Were a long way from the time when these were cheap and plentiful tho.
|
|
|
|
Post by Yogi on Sept 30, 2019 13:17:15 GMT 1
The last one I bought was off eBay and cost £250,,,2 years ago I know 😱
|
|
|
|
Post by oldelsieboy on Sept 30, 2019 14:14:13 GMT 1
The Lc club looms are discontinued I found out last week. The looms are not discontinued AFAIK new orders are now being taken. OEB |
|
|
|
Post by petenofear on Sept 30, 2019 17:11:12 GMT 1
The Lc club looms are discontinued I found out last week. The looms are not discontinued AFAIK new orders are now being taken. OEB Are they complete looms and do they do them for the f2 , be be nice to have a new one |
|
|
|
Post by oldelsieboy on Sept 30, 2019 17:16:35 GMT 1
The looms are not discontinued AFAIK new orders are now being taken. OEB Are they complete looms and do they do them for the f2 , be be nice to have a new one They are complete but for 4L0/1 only. 
OEB
|
|
|
|
Post by petenofear on Sept 30, 2019 17:24:23 GMT 1
That’s a shame
|
|
|
|
Post by Norbo on Sept 30, 2019 17:37:53 GMT 1
|
|
|
|
Post by petenofear on Sept 30, 2019 18:09:49 GMT 1
So you do thanks lea
I will have a big list for you soon as going to start a full resto on my f2 so will be in touch soon
Thanks pete
|
|
|
|
Post by Mr Kipling on Sept 30, 2019 18:29:45 GMT 1
Like Yogi says Dreamer....
|
|
|
|
Post by JonW on Sept 30, 2019 23:27:34 GMT 1
The Lc club looms are discontinued I found out last week. The looms are not discontinued AFAIK new orders are now being taken. OEB In the link as posted on this thread it says this Nigel: "Notification: We have had to suspend the sale of the looms due to unforeseen circumstances." I used the word discontinued, they say suspended. Either way you cant buy one. |
|
|
|
Post by rigga on Oct 1, 2019 9:32:59 GMT 1
Guy who made them was taken ill /had issues, so couldn't continue, now all OK, so taking orders again for them e
|
|
|
|
Post by ringding on Oct 1, 2019 13:01:13 GMT 1
|
|
OldhasBeen
L plate rider.
ExProddy 80's Racer :-D
Posts: 23
|
Post by OldhasBeen on Oct 9, 2019 10:30:29 GMT 1
Just got given a poor condition one - had the fuse box chopped out and completely bypassed :-O took about a day to strip back and reinsert using the wiring diagram - had to use some new boxes n connections - but most no matter how bad can be recovered for use :-)
|
|
|
|
Post by reedpete on Oct 9, 2019 13:06:11 GMT 1
Just got given a poor condition one - had the fuse box chopped out and completely bypassed :-O took about a day to strip back and reinsert using the wiring diagram - had to use some new boxes n connections - but most no matter how bad can be recovered for use :-) Can be a bit like Rodney’s broom though.... I tacked faults and repaired a 4L0 one to ‘save money’ ....3 days later ....a working bike but so wished I’d just shelled out for a plug and play ! you just get sucked in... |
|
OldhasBeen
L plate rider.
ExProddy 80's Racer :-D
Posts: 23
|
Post by OldhasBeen on Oct 9, 2019 15:17:43 GMT 1
yup it defo is a case of strip it all back, check it all, if anything looks so so sort it rather than leave- have the right tools ( a good soldering iron and proper crimping pliers) n read that schematic until you see it in your sleep lol ps always on the lookout for old looms that maybe well dead as I can reuse the blocks as many I see have been "chopped off n bulleted" - gotta love a challenge
|
|
