|
|
Post by headcoats on Aug 8, 2019 12:59:38 GMT 1
Can't figure out how the blummin thing fits !
I know where the little hook and tang goes and how rotating it round. it brings the gear into play
It's in bits at the moment, but which direction does the "lobe" have to be pointing ?
Also the tang spins on the helical gear , so does this have to be turned to set it ? |
|
|
|
Post by stusco on Aug 8, 2019 13:08:33 GMT 1
Can't figure out how the blummin thing fits !
I know where the little hook and tang goes and how rotating it round. it brings the gear into play
It's in bits at the moment, but which direction does the "lobe" have to be pointing ?
Also the tang spins on the helical gear , so does this have to be turned to set it ? Dusty did a thread on this recently rdlccrazy.proboards.com/post/443475/thread |
|
|
|
Post by headcoats on Aug 8, 2019 13:49:26 GMT 1
Bang on !
That should be made a sticky if it hasn't already been done :-)
I had the spring on the wrong way round LOL
The 6 0 clock position of the lobe though , I don't think I would have got |
|
