|
Post by stevietee350 on Jul 31, 2019 15:30:58 GMT 1
Well, I switched ignition on and I heard the servo whirring and moving a quarter turn either way then stopped but I can still heard a smaller noise and vibration from it but nothing externally is moving,it is doing this while ignition is on ,any ideas ?
|
|
|
Post by midlifecrisisrd on Jul 31, 2019 16:34:01 GMT 1
A lot of them whine and chatter a little
Steve
|
|
|
Post by bare on Aug 1, 2019 4:57:33 GMT 1
Hey the things are 30 + years old.. a little respect.. Take it apart and lube the gear train, clean up the commutator and spritz the Feedback pot with quality pot cleaner/lube. OR ? buy a removed EXUP servo (same part) from a ~ 2005 Yama. Almost for free too.
|
|
|
Post by stevietee350 on Aug 1, 2019 9:26:36 GMT 1
Thanks lads that's great advice on the stripping, lubing etc. Glad I came on this forum !
|
|