|
Post by philymon on Apr 12, 2019 12:17:14 GMT 1
Hi Sorry for posting but I can't find the mod for the drilling of the brass thingy in the carb on the pilot circuit Tried most searches can anyone point me in the right direction please?
|
|
|
Post by JonW on Apr 12, 2019 13:05:23 GMT 1
If its the thing im thinking about its not really a mod, its just a cleaning technique.
Google RD400 brass balls and you should find a post to a good write up on their forum.
|
|
|
Post by jon on Apr 12, 2019 17:06:35 GMT 1
|
|
|
Post by philymon on Apr 14, 2019 11:40:23 GMT 1
Thanks guys, that's the one
|
|
|
Post by rich on Apr 14, 2019 19:26:59 GMT 1
Not wishing to state the obvious but you don't permanently leave the brass balls out, you drill them out to allow cleaning of the airway behind otherwise you can't get in there. You must fit new brass balls afterwards as the opening must be blanked off as per original.
Whatever you do, don't confuse this with the LEDAR air jet mod on the RD125LC carb!!!!
|
|