|
Post by twostroker on Jan 20, 2019 16:50:03 GMT 1
When I bought my mk3 Ypvs I came with a nikkon exhaust ( not fitted)
Am I correct in thinking I’d need to re-jet to use it? Are they any good on a standard bike? It’s almost new condition, id like a aftermarket exhaust but don’t want to bugger about with jetting and not interested in making it faster
|
|
|
Post by broughton on Jan 20, 2019 21:37:32 GMT 1
mate of mine had one fitted to his mk1 and never up jetted and ended up bowing it up, i would start by going 3 sizes up from standard jetting and work from there always do the plug chops that will tell you how its running,id always preffer them to run a little on the rich side.
|
|
|
Post by petenofear on Jan 20, 2019 21:51:59 GMT 1
running a micron and boyson reads had no problems with jets Stroker has seen the video
Need to lean off a little but never had any problems bike runs sweet and flys
Don’t want to run to rich
|
|
|
Post by twostroker on Jan 20, 2019 21:52:18 GMT 1
I can’t be bothered to up jet as I want the bike to maintain reliability
Will offer it for sale or swap for a allspeed on here I guess.
|
|
|
Post by petenofear on Jan 20, 2019 21:54:53 GMT 1
Only pipe I have race pipe is a jl race pipe Link some where
|
|
|
Post by petenofear on Jan 20, 2019 21:56:35 GMT 1
|
|
|
Post by jon on Jan 21, 2019 21:11:40 GMT 1
I can’t be bothered to up jet as I want the bike to maintain reliability Will offer it for sale or swap for a allspeed on here I guess. I don’t understand how jetting the carb to suit the pipe would make it more unreliable? Jon
|
|
|
Post by twostroker on Jan 22, 2019 8:51:48 GMT 1
Re-jetting It’s not that hard , I just can’t be bothered if I’m honest. Id rather a exhaust that just bolts on with no messing about. Possibly going to be for sale or even a swap for a Gibson/ allspeed
|
|
|
Post by mellow on Jan 22, 2019 18:01:43 GMT 1
Nice pipe
|
|
|
Post by twostroker on Jan 22, 2019 18:57:05 GMT 1
Nice pipe Thanks I’d rather a allspeed or micron
|
|
|
Post by bertiemollie on Jan 26, 2019 9:58:04 GMT 1
How much are you asking?
Andrew
|
|
|
Post by twostroker on Jan 27, 2019 18:22:28 GMT 1
How much are you asking? Andrew I’d like a allspeed or micron so enough to cover the cost of buying one in similar condition ideally. Or a swap would be easier.
|
|