|
|
Post by sharpey on May 8, 2018 13:25:35 GMT 1
Hey folks,
Would anyone happen to know of a fix?
Speedo needle works just fine, but neither the odometer nor the tripometer will tick over... Also, the reset knob spins freely seemingly doing nothing...
Am not afraid to dig in to it to fix it, if indeed this can be done,
Would appreciate any advice.
Ta,
James
|
|
|
|
Post by jon on May 8, 2018 13:53:48 GMT 1
I think this is driven by two plastic cogs.
Could these have sheared?
Either way I think it will be a strip down job.
Jon
|
|
|
|
Post by bezzer on May 8, 2018 19:22:23 GMT 1
I’d be interested to know if there is a fix for this issue - my trip meter is not ‘clocking up’ either and the trip knob also spins without effect.
Odometer is fine though.
|
|
|
|
Post by sharpey on May 9, 2018 9:25:01 GMT 1
Righto... I'll get the spanners out...
|
|
|
|
Post by donkeychomp on May 9, 2018 11:24:31 GMT 1
This has spurred me on. Owned my car for 6 years and in all that time the speedo has read 75,995. I tell the MOT guy half the time I drive in reverse...
Alex
|
|
|
|
Post by bezzer on Apr 19, 2019 10:38:20 GMT 1
James, Did you ever get to the bottom of this issue with your speedo?. Still not looked into mine yet!!
bezzer
|
|
|
|
Post by wangwang on Apr 19, 2019 17:10:33 GMT 1
Likely to be the plastic cog on the end of the trip drum, the drive cogs are metal
|
|
|
|
Post by bezzer on Apr 19, 2019 19:36:56 GMT 1
Likely to be the plastic cog on the end of the trip drum, the drive cogs are metal Thanks for the info wangwang, I’m guessing original replacements are not available?, and no-one has remade them?!. |
|
|
|
Post by wangwang on Apr 19, 2019 22:00:59 GMT 1
Likely to be the plastic cog on the end of the trip drum, the drive cogs are metal Thanks for the info wangwang, I’m guessing original replacements are not available?, and no-one has remade them?!. No, but you can use spare parts from other models, you need to open it up first to check which bits are at fault. |
|
