mt
Thrash Merchant
Posts: 489
|
Post by mt on Dec 2, 2018 14:30:34 GMT 1
Has anyone spare decals for the belly pan? I don’t want to buy a whole set for just those Just like the one I had in about '87/'88 41 by Gary Woodward, on Flickr
|
|
|
Post by mak595 on Dec 2, 2018 14:31:47 GMT 1
Looking great, hope mine is half as good!!!
|
|
|
Post by doohanno1 on Dec 2, 2018 14:34:34 GMT 1
Has anyone spare decals for the belly pan? I don’t want to buy a wh0ole set for just those I think " Classicreproductions" will also do tbese..
|
|
|
Post by siabost78 on Dec 2, 2018 18:46:56 GMT 1
This is a fantastic thread, you've done a great job in a short time👍
|
|
|
Post by panzermatt on Dec 2, 2018 20:30:13 GMT 1
This is a fantastic thread, you've done a great job in a short time👍 thank you very much sir!
|
|
|
Post by oldbritguy on Dec 2, 2018 23:33:49 GMT 1
This is a fantastic thread, you've done a great job in a short time👍 thank you very much sir! I concur You going for Yogi's speed build title? Can't wait for the first fire up as well
|
|
|
Post by andrel on Dec 3, 2018 18:25:53 GMT 1
Congrats on a great build and a very informative thread.
Have fun riding
|
|
|
Post by zedixe13 on Dec 9, 2018 1:20:11 GMT 1
|
|
|
Post by panzermatt on Dec 10, 2018 18:50:34 GMT 1
Incredible work from Arrow, like mutts nuts this guy knows his stuff.
|
|
|
Post by panzermatt on Dec 10, 2018 18:51:24 GMT 1
Would you look at that lads! It’s better than new.
|
|
|
Post by panzermatt on Dec 15, 2018 15:53:06 GMT 1
Fit the oil pump
|
|
|
Post by panzermatt on Dec 15, 2018 15:53:23 GMT 1
|
|
|
Post by panzermatt on Dec 15, 2018 15:55:38 GMT 1
She started first kick! Follied arrows instructions to the letter. Ticks over lovely, no leaks anywhere. Chuffed.
|
|
|
Post by panzermatt on Dec 15, 2018 15:58:35 GMT 1
the only cloud in my ypvs sky is the rev counter is very lazy, barely moves. it was working fine before i stripped her. any ideas?
|
|
|
Post by Mr Kipling on Dec 15, 2018 16:02:02 GMT 1
done a great job u have , well done , I likey..
|
|
|
Post by panzermatt on Dec 15, 2018 16:02:58 GMT 1
done a great job u have , well done , I likey.. thanks very much man.
|
|
|
Post by stusco on Dec 15, 2018 16:29:17 GMT 1
I bought individual decals from image works
|
|
|
Post by andrel on Dec 15, 2018 19:39:21 GMT 1
A first kick start - what a great result. Congrats. Now you will just have to split the cases again to fix the tacho drive
|
|
|
Post by panzermatt on Dec 15, 2018 19:46:51 GMT 1
the needle works, sort off....it goes to about 4k and stays there and returns very slowly
|
|
|
Post by midlifecrisisrd on Dec 15, 2018 21:56:58 GMT 1
the needle works, sort off....it goes to about 4k and stays there and returns very slowly They do not like long periods of inactivity The lube on the shaft tends to set like glue A little wd40 on the mechanism helps but be careful you don't get it on the dial Steve
|
|
|
Post by panzermatt on Dec 25, 2018 15:03:44 GMT 1
Her good self got me some stickers for Christmas, needless to say I fit them straight away
|
|
|
Post by panzermatt on Dec 25, 2018 15:04:43 GMT 1
|
|
|
Post by panzermatt on Dec 25, 2018 15:05:55 GMT 1
The left side is perfect, slight bit off on the right, but f**k it, I’m hungover and at 100 mph no one will notice
|
|
|
Post by panzermatt on Dec 25, 2018 15:06:41 GMT 1
Happy as a pig in shite putting these on.
|
|
|
Post by panzermatt on Jan 2, 2019 18:53:50 GMT 1
Took bike out for first ride, stopped after 5 miles to see if it was leaking or anything, nothing! ticks over lovely too. only revved her to about 4-5 k as new rings, brough it to my friend (doohan) on here, he promptly igonored running in instructions ad he tore up and down his road.
|
|
|
Post by ypvs400 on Jan 2, 2019 20:01:59 GMT 1
Took bike out for first ride, stopped after 5 miles to see if it was leaking or anything, nothing! ticks over lovely too. only revved her to about 4-5 k as new rings, brough it to my friend (doohan) on here, he promptly igonored running in instructions ad he tore up and down his road. Congratulations and a great result after all the work you have put in all in record time and a cracking start to the year.
|
|
|
Post by panzermatt on Jan 2, 2019 20:03:51 GMT 1
Took bike out for first ride, stopped after 5 miles to see if it was leaking or anything, nothing! ticks over lovely too. only revved her to about 4-5 k as new rings, brough it to my friend (doohan) on here, he promptly igonored running in instructions ad he tore up and down his road. Congratulations and a great result after all the work you have put in record time and a cracking start to the year. thanks man! really chuffed with it.
|
|
|
Post by Yogi on Jan 2, 2019 20:06:44 GMT 1
I concur You going for Yogi's speed build title? Can't wait for the first fire up as well Collected most parts now so gonna try to get my crown back soon Looking good Matt,great job A different Matt
|
|
|
Post by dusty350 on Jan 2, 2019 22:13:37 GMT 1
Looks great and good to hear it's running well - job well done Dusty
|
|
|
Post by doohanno1 on Jan 2, 2019 22:31:09 GMT 1
Sweet little bike.. Great job , well done...
|
|