|
Post by reedpete on Jun 17, 2019 18:09:20 GMT 1
Dropped this summerโs hooli tool off for โpre-motโ...letโs see what they make me attend to!
|
|
|
Post by donkeychomp on Jun 17, 2019 22:00:27 GMT 1
Is that the 250LC or the TZR Peter?
Alex
|
|
neil
Thrash Merchant
my 125
Posts: 385
|
Post by neil on Jun 18, 2019 8:56:43 GMT 1
Cheers Alex i will get a damper soon. Neil
|
|
|
Post by beardy on Jun 22, 2019 17:11:30 GMT 1
Cut the hangers off my brand new pipes from muttsnuts-aawww it hurt. Had to refabricate them because my barrels have been lowered.
|
|
|
Post by donkeychomp on Jun 22, 2019 21:46:51 GMT 1
Swore at it.
Alex
|
|
|
Post by peddrotzr on Jun 23, 2019 10:19:15 GMT 1
Took her out for a quick spin.
|
|
|
Post by copper99 on Jun 28, 2019 17:26:57 GMT 1
Went out with a mate and spent a fab hour or so having a thrash about on the lanes of Northants...
|
|
|
Post by stusco on Jun 28, 2019 17:29:11 GMT 1
Went out with a mate and spent a fab hour or so having a thrash about on the lanes of Northants... Bellybuttons ๐
|
|
|
Post by stusco on Jun 28, 2019 17:29:37 GMT 1
Fixed the puncture on my back wheel
|
|
|
Post by beardy on Jun 29, 2019 17:41:06 GMT 1
Re welded the hangers on my new mid range pipes and fitted them. They do sound good.
|
|
|
Post by jackjabba on Jun 29, 2019 17:48:34 GMT 1
Finally put the Kenny Roberts bodywork on the LC. Its been sat in the garage for at least a year. Just checked it been 2 years since I bought it from Howard.
|
|
|
Post by veg on Jun 30, 2019 8:34:59 GMT 1
Went out with a mate and spent a fab hour or so having a thrash about on the lanes of Northants... North or south ?
|
|
|
Post by copper99 on Jun 30, 2019 19:52:53 GMT 1
Went out with a mate and spent a fab hour or so having a thrash about on the lanes of Northants... North or south ? South mate...was in Bedfordshire on it all day yesterday and roasted my nuts off, my Dadโs Bantam was the better bet most of the day..Are you Northants way?
|
|
|
Post by veg on Jun 30, 2019 20:31:55 GMT 1
Iโm on the Leicestershire Northamptonshire border my post code is Leicestershire but Iโm just over the border in Northamptonshire
|
|
|
Post by pdxjim on Jul 1, 2019 1:01:28 GMT 1
Moved it out of the way to put new a new rear tire/mousse on my KTM 300xcw.
Got a 10 day camping ride out in Idaho coming up starting 13 July.
8 bikes in a hired van drive 400 miles east to Idaho from Portland, Oregon. Ride about 1100 miles and rough camp self contained on the Idaho Backcountry Discovery Route. Then hire van west back home to Oregon.
|
|
|
Post by pdxjim on Jul 2, 2019 1:46:51 GMT 1
Unpacked this lot: Clutch holder thingy gonna be a rare luxury for me. Been disassembling and rebuilding my bikes with a rattle gun, rags and pennies for 20 years. Also got clutch pusher rod, front master rebuild kit and lever, footrest rubbers, and YPVS balance pipe and clips.
|
|
tlmark
Drag-strip hero
Posts: 203
|
Post by tlmark on Jul 2, 2019 21:54:14 GMT 1
Dropped the rolling chassis off to the painter to line the stripes up and had a cheeky peek at the almost finished tank
|
|
|
Post by 137d on Jul 2, 2019 22:45:15 GMT 1
Bought 2 basket case UK 350lc's last week.
Went through all the bits to see what's missing and what's there.
Sent away for the V5's.
Not sure I need another project.
|
|
|
Post by marrcel on Jul 3, 2019 22:23:54 GMT 1
That will give a lot of traction Toby. You will have practice to sit on the fuel cap๐
|
|
|
Post by bodger on Jul 6, 2019 10:41:09 GMT 1
Added some more new items to what is rapidly turning into a money Pit ๐
|
|
|
Post by Tobyjugs on Jul 6, 2019 11:07:29 GMT 1
That will give a lot of traction Toby. You will have practice to sit on the fuel cap๐ Unfortunately I'm not going to make it.
|
|
|
Post by rigga on Jul 6, 2019 12:27:05 GMT 1
Passed another mot, 39 years old now (well some of it anyways)
|
|
|
Post by wangwang on Jul 6, 2019 14:44:13 GMT 1
Made all the locks work from my new ignition barrel key ๐
|
|
|
Post by 2banger on Jul 6, 2019 15:27:27 GMT 1
This morning remove individual foam filters , fit Airbox/unifilter back onto 39mm dellorto's
|
|
|
Post by midlifecrisisrd on Jul 7, 2019 13:31:41 GMT 1
Woohoo!
Just bagged another pair of nos Jap spec mirrors
Obsession started when I bought the 3hm1 rz250 and I liked the rectangular standard mirrors so set about finding a pair for it as they were missing
6 months later now got:
2 x pairs NOS 3hm1/r1-z250 mirrors 1 x pair used gen 3hm1/r1-z 1 pair NOS xj mirrors (same style as above but stem bend different)
So that's a pair for all 4 of my bikes/builds ๐
Steve
Update - jeez I need to reign it in, just found a box with 2 pairs of used gen lc mirrors and another pair of used jap mirrors
I really need to keep a list of bits I've bought ๐
|
|
Deano
L plate rider.
Posts: 44
|
Post by Deano on Jul 12, 2019 8:56:58 GMT 1
Fitted new allspeeds ๐ ๐๐จ๐จ๐จ๐จ๐จ
|
|
mt
Thrash Merchant
Posts: 489
|
Post by mt on Jul 13, 2019 16:33:51 GMT 1
|
|
|
Post by 2banger on Jul 13, 2019 16:35:36 GMT 1
Swapped out vforce 3 for vforce 4 Road test tonight, Barton bike night
|
|
|
Post by copper99 on Jul 14, 2019 10:08:38 GMT 1
|
|
busby
Weekend rider
RD 350 4l0
Posts: 87
|
Post by busby on Jul 30, 2019 19:43:18 GMT 1
Had lots of bits in the post, trying to free the pistons from the calipers. Sprayed lots of WD40 everywhere. Still itโs a start.
|
|